EM command module questions

I have the latest command module activated off a transbrake. My screen is currently red and it says safety box not tripped but when you go into that feature it says teather tripped. I am trying to get it to fire through the crank trigger but have no spark. I have already timed the mag and it runs the way it should. EM said I can just put 12v to the red enable wire and it will bypass the safety box but that did not work when I tried it. Any suggestions are much appreciated.

 

You have the cables for the burst panel? It runs across the burst panel and ties to the “dog bones”? If that cable isn’t connected, or it’s unliplugged somewhere in the car the screen will be backlit red and car won’t start.

 

The red ignition enable wire on the timing connector to the module needed to have 12v on it to enable ignition. I was still associating a red screen with no start but that’s not the case.