490 cu.in Noonan Long Block with Super 600's! ++

Discussion in 'Noonan Classifieds' started by Paul Noakes, Apr 9, 2022.

  1. Paul Noakes

    Paul Noakes Member

    Joined:
    Nov 28, 2006
    Messages:
    129
    Likes Received:
    0
    490 Cu.In. Noonan Hemi Front Drive Oil Pump

    Long Block (No intake manifold): $32,000.00 USD

    Short Block- $22,000.00 USD

    Short Block (separate) $22,000.00

    Noonan Billet Aluminum Hemi Block- 4.500” bore, 4.8 Spacing, .500” short deck, 65mm Cam, Front mount oil pump

    8- sleeves –new last year re honed with a torque plate this year

    1. 17 run Winberg Crank Shaft 3.900” stroke

    2. Set of GRP connecting rods 6.830” - new
    1. New Clevite rod bearings- V’s

    2. New set of Clevite main Bearings – V’s
    1- Set J&E Pistons- 4.500” – 17 runs (buttons inc.)

    8- Trend M300 coated wrist pins with 17 runs

    1- New set of Sealed Power rings (Hell Fire)

    1- Used RCD gear drive with bearing support and titanium hub with degree wheel and magnets for crank trigger – 17 runs

    1- Used fuel pump extension with shaft- polished

    1. Used Bullet (Mark Brew) 65mm camshaft- cam spec sheet supplied-17 runs
    1. Used set of Morale lifters 1.000” diameter- 17 runs
    1. Used set of Trend Push Rods- 17 runs
    1. Used Noonan oil pan -polished- quick disconnect fitting
    1. Used Barnes Oil Pump 17 runs
    1. Complete set of XRP Oil lines including quick disconnect oil pan line.
    1. Shortened RCD Mag drive



    Spare parts included:

    7- New Sleeves

    5- (full Set) Main Caps

    1. Timing cover
    Cylinder Heads (separate): $8500.00 USD
    Heads have 30 runs on them but many parts replaced 17 runs ago

    NRE 2.560” intake valve, 1.900”exhaust valve

    Manley Valves (30 runs)

    Manley retainers (17 runs)

    Manley Double springs 8 used intake (17 runs) 2.135” install height 530lbs, 8 used exhaust 2.135” 500lbs

    Manley Lash-Loc valve keepers & lash caps – (17 runs)

    All studs ready run



    Long Block Comes With: $32,000.00 USD


    1. 1 set of Manton Tool steel pushrods

      1 set of Manton intake and Reid exhaust rockers

      1 set of Williams valve covers with spray bars


    Fuel Pump $1900.00 USD

    1. Waterman Red .850 fuel pump (like new) with inlet and outlet. (Randy Anderson openings)


    Ignition System $2000.00 USD

    1-MSD 44 Pro Mag, coil and points box



    Leanders Clutch $3500.00 USD

    Comes with one used pack
     
    #1
  2. brandon mckinney

    Joined:
    Jan 2, 2008
    Messages:
    285
    Likes Received:
    1
    Would you be interested in selling one set of the grp rods
     
    #2
  3. Paul Noakes

    Paul Noakes Member

    Joined:
    Nov 28, 2006
    Messages:
    129
    Likes Received:
    0
    Hello Brandon, thank you for the interest. I made the mistake of copying all my info on my motor and pasting it on this add. I can't seem to figure out how to edit it now?? lol
    This is a complete motor minus the intake manifold, I would be willing to sell the short block separate or the heads separate, so I put all the details down. Its kind of a mess- sorry.
    I also have a BAE motor with the exact same combo and the same heads. So IF someone wanted both sets of heads I would take them off my other motor.
    One set of my heads are brand new!
    I have a few sets of used rods I could sell cheap- they told me to put 35-40 runs on them I changed them every 15.
    I went 5.51 @ 265 with this combo
     
    #3
  4. Paul Noakes

    Paul Noakes Member

    Joined:
    Nov 28, 2006
    Messages:
    129
    Likes Received:
    0
    I would also like to point out that this motor comes with everything. oil pump, lines, mag drive, spares and the down nozzles with the drop in jets for the $32k
    Thanks again
     
    #4
  5. hydrotherapy

    hydrotherapy Member

    Joined:
    Oct 12, 2004
    Messages:
    258
    Likes Received:
    3
    would you be interested in selling the rockers
     
    #5
  6. paint guy

    paint guy Member

    Joined:
    Sep 6, 2008
    Messages:
    260
    Likes Received:
    0
    where are you located? thanks
     
    #6
  7. Paul Noakes

    Paul Noakes Member

    Joined:
    Nov 28, 2006
    Messages:
    129
    Likes Received:
    0
    I am in London ON. Canada. Willing to get into USA to certain race tracks
     
    #7
  8. Paul Noakes

    Paul Noakes Member

    Joined:
    Nov 28, 2006
    Messages:
    129
    Likes Received:
    0
    Sorry Hydrotheropy at this point I really do not want to separate this stuff. If someone asked about the heads then I would be interested. It is a great "complete piece" at a bargain if someone is looking for a top quality NEVER hurt engine.
     
    #8
  9. Paul Noakes

    Paul Noakes Member

    Joined:
    Nov 28, 2006
    Messages:
    129
    Likes Received:
    0
    New price on long block!
    $28,000.00 with all the spares!
     
    #9
  10. Paul Noakes

    Paul Noakes Member

    Joined:
    Nov 28, 2006
    Messages:
    129
    Likes Received:
    0
    This is a great motor with nothing but the best!
     
    #10
  11. Paul Noakes

    Paul Noakes Member

    Joined:
    Nov 28, 2006
    Messages:
    129
    Likes Received:
    0
    Also have a BAE .500 tall deck manifold for sale $2500
    JBR short injector with barrel valve flow meter and all lines -$4000
     
    #11
  12. Paul Noakes

    Paul Noakes Member

    Joined:
    Nov 28, 2006
    Messages:
    129
    Likes Received:
    0
    New price on Noonan long block!
    $28,500.00 USD
     
    #12
  13. Aaron Horween

    Aaron Horween New Member

    Joined:
    Sep 28, 2022
    Messages:
    7
    Likes Received:
    0
    Check your messages
     
    #13
  14. Paul Noakes

    Paul Noakes Member

    Joined:
    Nov 28, 2006
    Messages:
    129
    Likes Received:
    0
    Engine sold, still have lenco CS1 parts, Waterman Red fuel pump, MSD ignition system, JBR short screw blower injector with the barrel valve and all the lines, 2 Leanders clutches with extra discs and floaters
     
    #14
  15. Richard Gore

    Richard Gore New Member

    Joined:
    Jun 29, 2016
    Messages:
    3
    Likes Received:
    0
    Do you still have the Leanders clutches?
     
    #15
  16. Paul Noakes

    Paul Noakes Member

    Joined:
    Nov 28, 2006
    Messages:
    129
    Likes Received:
    0
    Hi there, thanks for the reply. Yes I do still have the clutches for sale
     
    #16
  17. Paul Noakes

    Paul Noakes Member

    Joined:
    Nov 28, 2006
    Messages:
    129
    Likes Received:
    0
    Engine sold, still have fuel pump, ignition system, Leanders clutches, CS1 parts/ ratio, Short JBR injector with Barrel valve and lines.
     
    #17

Share This Page