Push Rod oilers

A photo of aluminum offset exhaust rocker and red stands would be a start. Size of chamber.

 

I can take a picture when I go out to the shop of the rockers. But heads are installed and I didn't cc them.

Dave

 

Pictures..
FYI Valves are INT 2.450 dia x 6.150 oal, EXH 2.0 dia x 5.820 oal

 

Confirmed by my expert. They are a Brad 3.
Then he asked ?
Correct pistons because of the bigger chamber.
Correct valve covers.
Intake rocker needs a little modification .
PM me and he will help you. Or maybe sell them.

 

PM sent.
Thanks

 

By the way the rocker stands are black. That doesn't show to well in the pics.

 

I’ve got the crap ones. Mine are Red

 

I sent a PM to you.

 

I have several BAE 3 Gold Exhaust Rocker Arms if you stay with them for sale-THANKS, Jim in TN
931-580-8804 text or Call

 

Correction... Stands are Gold.

 

Red Standard (low) Ratio
Blue Standard (low) Ratio / Heavy Duty
Aluminum High Ratio / Heavy Duty
Black High Ratio

What would be the gold?

 

From what I was told the gold ones are the original Brad 3 and they are different because of where he placed the valves. I still don't know if the valves are closer or farther from centerline, or twisted in some fashion. all I can get is they are different.

If anyone has an intake and exhaust rocker for a Brad 5 or any that are shaft mounted that is broken but everything is there I would pay shipping to get them. Then maybe I can see what he did.

Dave

 

I have several of the BAE 3 fathead gold exhaust rockers if you want to have some spares for $100.00 each-THANKS! Jim
931-580-8804

 

Jim, I still have your info on the rockers, except in the text you sent me you were asking 250.00 for them..
I broke a rod at the last race I was at. Broke the block, cam and a bunch of other stuff. Let me get squared away with what it's going to cost me and I'll get in touch.

Thanks
Dave

 

Dave, I did not want to break up earlier a set of 8, but found 2 spares and they are for sale if interested-THANKS! Jim in TN
csmjimbkyle@bellsouth.net or text/call 931-580-8804

 

I should post pics of ur heads? PS sent u a pm message thx dave

 

You have pictures of my heads?? Or do you want me to post pictures?

I'm looking to sell my hemi. Just not really feasible to bracket race a solid block and heads. Not if I go rounds anyway. Just not enough time between rounds.
What do you guy's think a complete engine with never run MGP rods would be worth?

Dave

 

Dave email me pics so we can chat blown526@icloud.com thx

 

I have several BAE 3 gold exhaust rockers arms if you need spares, and I ran a BAE 3 fathead for several years and just always pre-oiled my pushrods and cups before each days racing and never any problems-Jim in TN
931-580-8804 or csmjimbkyle@bellsouth.net

 

Cool infr