river rat water pump , TFX , RCD belt guard

Discussion in 'Noonan Classifieds' started by Brendan, Apr 11, 2020.

  1. Brendan

    Brendan Authorized Merchant

    Joined:
    Feb 22, 2010
    Messages:
    264
    Likes Received:
    1
    Enerle 3 rib alcohol bugcatcatcher w/k valve -1350.00

    ARP flywheel bolts for chevrolet - 40 set

    12 Titanium nozzle bodies 100.00

    tons of hilborn , enderle jets ,nozzle bodies ect ~ call

    Mike kuhl river rat pump 525.00 BRAND NEW !


    11 mm belts 25.00 for 3

    Enderle K style metering valve 125.00

    ARP Hemi L-19 flywheel bolts -65.00 set

    piston racks with covers - 150.00

    3 funny car master cylinders 100 for all ~

    392 hemi cranks magged / polished 500.00 ea


    426 hemi 3.750 crank Bryant fresh from marine 1500.00


    nice sleeve driver -55.00 .....for aluminum motors 4.187 4.250 4.375.4.440 bores

    TFX olson dragster wet sump oil pans -325.00

    Black chutes 12' with black or silver pack - 325.00 some new...

    Simpson 6 pt dragster belts -125.00 still in cert .

    392 HEMI Cragar blower manifold 575.0

    lots of morse cables - Call and I will measure -give me your lengths ~
    Moore couplers 40.00 ea 6 in stock


    -20 SIMPSON 2 peice firesuit black - 6' 200#-975.00

    silver or black chute packs - 50.00 some new ~

    RCD blower belt guard starter bracket 3 bolt mount 125.00


    KB complete short block never been hurt 4.375 x 4.375 =526 was in funny car ,
    set up for fat heads, std deck. with spares
    8500.00


    1 Bryant 4.500 stroke 2 key way crankshafts 8 runs on them fresh mag and polish - 1850.00 ea shipped


    9" lenco center section,40 spline with coupler 950.00

    RCD 9" long snout shaft 35.00

    3" trailer ball for goose neck 35.00

    Aluminum funny car funnel -set up for vented tank 1-3/4 opening with filter 225.00

    Waterman 1.250 inlet fitting -25-

    System 1 oil filter with frame mount 175.00 -12 fittings

    System 1 inline oil filter with -16 fittings 100.00


    SB chevy blower manifold 275.00

    sb chevy idler bracket with pulley and tee nut - 295.00

    RCD oil pump adapter with billet clamp 25.00 never used

    50 NGK spark plugs 6061-11 -200.00

    bug /bird stainless hat lines 25.00

    Jackson BDK valve 200.00


    9" pinion support with bearing - 7

    T&D shaft rockers for sb chevy 750.00

    Tele tach new 325.00

    BB Chevy Donovan gear drive 895.00 with drive for fuel injection NEW


    10" East West titanium glide clutch with discs and floaters fresh cert 3300.00

    fresh blown 468 ci blown alcohol NEW GM 4 bolt big block chevrolet std deck , new studs , merlin heads all new valves ,springs retainers , roller camshaft ,lifters forged crankshaft , new pistons, rods ,Akerly&childs rings, bearings nice 7.0 motor -8000.00 -blower and injector available


    BB copper head gaskets 4.390 x .40 50.00 pr .

    392 cragar blower manifold drilled for port nozzles -629.00


    Blower shop gas 6-71 blower and EDELBROCK sb chevy blower manifold 2300.00

    BICHIN piston rack covers street rod quality keep those soldiers clean and warm !- 59.00 ea

    426 engine short block covers 75.00

    TFX copper head gaskets new in package .100 and .80 .70 50.00 pr . 4.250 bore


    big block chevy dragster zoomies 425.00


    8" blower snout 350.00 Littlefield

    50-100 hydrometer 190

    16 port dist block 30.00

    spark plug tee wrench 30.00

    392 hemi zoomies 325.00


    NEW Blower shop 6-71 alcohol blower ! 2650.00

    4:71 9" rear end gear with coupler for dragster 75.00

    Dragster oil/ fuel tank -5 gallons black anodized 250.00

    AJ 426 exhaust gaskets 25.00 pr.

    big Moore couplers 50.00 ea x 5

    13" MOORE drive shaft - 125.00

    RCD 11mm belts 1595 2 for 25.00 ea . x 20 available


    426 hemi head studs ;


    10.250 11' long x16 120.00

    1/2 x11.00 x16 125.00

    9/16-1/2 step 12.250 long x13-150.00


    roller lifters BB chevy - 75.00

    Edelbrock blower manifold small block chevy - 275.00.


    TRICK TI clutch can for dragster - 392 hemi 2900.00 -as new

    B&J 2 speed w/ shifter and reverser 2400.00

    Brad anderson oil pan gaskets 35.00 ea

    TFX oil pan gaskets 38.00 ea

    44 amp coil -75.00

    Blower injector spacer 2 inches tall -2 inches forward 10" opening lines up injector on blower opening - 295.00

    Polished Donovan 392 Hemi valve covers with short breathers - 1550.00

    417 DONOVAN VALVE COVERS nos polished 1350.00

    Simpson fire mask in red blue orange or silver 335.00
    Goggles -98.00



    Brendan (408)266-3324 bmurry@racecarparts.com
    www.racecarparts.com
    ups every day , Visa /MasterCard
















    [IMG]

    [IMG]

    [IMG]

    [IMG]
     
    #1
    Last edited: Apr 12, 2020
  2. Joey Mackillican

    Joined:
    Jan 21, 2020
    Messages:
    43
    Likes Received:
    0
    What brand TFX head gaskets ?
     
    #2
  3. Brendan

    Brendan Authorized Merchant

    Joined:
    Feb 22, 2010
    Messages:
    264
    Likes Received:
    1
    SCE
     
    #3
  4. Kevin O'Dell

    Kevin O'Dell Member

    Joined:
    Feb 26, 2008
    Messages:
    84
    Likes Received:
    2
    I would like to purchase the titanium nozzle bodies and the NGK 60601-11. PM sent
     
    #4

Share This Page