Fuel/Alcohol Motor Parts

3 different types of 4.25 bore, big pin pistons:
- Ross 1.86 compression height with .439 dome height (48.767 cc). 12 used ($20 each) 2 new ($30 each)
- Ross 1.86 compression height with .330 dome height (43.43 cc). 1 used and 8 new (same prices as above)
- BME 1.797 compression height flat top. 6 new ($50 each) 6 used ($30 each).

2 different types of 4.187 bore, big pin pistons:
- Venolia approx 1.64 compression height flat top. 22 used ($25 each). These are all cut on top so the heights range a few thousandths
- BME approx 1.64 compression height flat top. 14 used ($25 each). All cut down as well.

2 different types of Darton 4.25 sleeves:
- 8 used 4.55 OD top and 4.49 OD bottom. ($35 each)
- 3 new ($60 each) 5 used ($35 each) 4.61 OD top and 4.55 OD bottom. (Darton p/n 100-1018-1D)

Head Studs:
- 10 9/16 x 11" used H19 A1 studs ($60 each)

9 used 11mm blower belts
- All off of big show cars and in good shape. $50 each

Carbon fiber funny car injector
- Like new $1750

9 brand new CP Carillo rods 7.106 long, big pin. $1200

11 used 3.400 long, 1.156 wrist pins. All in good shape. $60 each

Brand new Lenco 1 3/8 input shaft for 8 1/8 can. Fine spline. $250

Contact me at chitownhustler@yahoo.com

 

All of this stuff is priced to move. I will listen to reasonable offers.

 

Need the shop space. Make an offer

 

What is the brand of the injector, any pictures of the injector

 

Email chitownhustler@yahoo.com for pics

 

Quarantine sale ongoing. Make an offer on anything