New Rotating Assembly

Discussion in 'PSI Superchargers Tech Questions' started by tafc1445, Mar 3, 2019.

  1. tafc1445

    tafc1445 Member

    Joined:
    Nov 19, 2014
    Messages:
    35
    Likes Received:
    1
    Where’s the best place to order a new rotating assembly from. Want to go to a different combo after junking my last block.
     
    #1
  2. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    For a Hemi?
     
    #2
  3. tafc1445

    tafc1445 Member

    Joined:
    Nov 19, 2014
    Messages:
    35
    Likes Received:
    1
    Yes Hemi. Moved to short deck blocks now and wanting to go 481 cubes with 4.375” bore and 4” stroke. Would like to use a 6.8” rod. Was hoping to be able to find somewhere that could order the whole lot in one go and check to see if it will all work together without problems.
     
    #3
  4. kosky racing

    kosky racing Comp Eliminator

    Joined:
    May 11, 2003
    Messages:
    888
    Likes Received:
    48
    Call Jeremy at BAE 909 923 8189
     
    #4
  5. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    #5
  6. promodracer

    promodracer Member

    Joined:
    Jan 8, 2008
    Messages:
    359
    Likes Received:
    2
    I would suggest Adam also.
     
    #6
  7. tafc1445

    tafc1445 Member

    Joined:
    Nov 19, 2014
    Messages:
    35
    Likes Received:
    1
    Still can’t get any answers. I’ve never had this much trouble trying to get parts sorted. I guess it’s the problem with having old heads and blocks.
     
    #7
  8. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    132
    It's a process getting things right for older stuff, much less one-off combinations.

    I have some 4.375 part numbers that would either work with a 6.755 or 6.775 rod length. That would be roughly 10.5 to 11:1 ish on compression. I need to double check the part number but I know where one of those part numbers are in in stock.
     
    #8
  9. tafc1445

    tafc1445 Member

    Joined:
    Nov 19, 2014
    Messages:
    35
    Likes Received:
    1
    Thanks Will. I’ve got old 10 bolt fuel heads that use 1/2 head studs, 2.375” intake and 2” exhaust valves chambers are around 175cc. I have some Arias pistons but they are that old of a number on the piston that Arias don’t have a record of them anymore.
     
    #9
  10. ITS IN MY BLOOD

    Joined:
    Dec 2, 2004
    Messages:
    1,093
    Likes Received:
    2
    Arias # 1530212
    1.428CH 81cc dome for 176 head 12.2 COMP w/.050 gasket ,.. if you used a 6.800 rod you would be -.003 out of hole if you use a 6.775 rod as Will mentioned you Would be .042 in the hole or deck clearence.
    Also Venolia makes the piston for the 176cc head #132314 but would need a 6.885 rod as the
    comp height is 1.370
     
    #10
    Last edited: Mar 16, 2019

Share This Page