Restripping a blower cost

Discussion in 'PSI Superchargers Tech Questions' started by dragster156, Dec 12, 2018.

  1. dragster156

    dragster156 Member

    Joined:
    May 31, 2012
    Messages:
    143
    Likes Received:
    4
    what is a ballpark price for freshening a blower.

    Psi 14/71 roots set up.
     
    #1
  2. jay70cuda

    jay70cuda Well-Known Member

    Joined:
    Sep 30, 2009
    Messages:
    1,139
    Likes Received:
    35
    Around $800 if no bearing are damaged
     
    #2
    dragster156 likes this.
  3. andy wilfong

    andy wilfong Active Member

    Joined:
    May 13, 2003
    Messages:
    190
    Likes Received:
    28
    Seems awful steep to me, we could do it for much less
     
    #3
    TADHemiracer and dragster156 like this.
  4. Outlaw Funnycar

    Joined:
    Jun 24, 2018
    Messages:
    48
    Likes Received:
    6
    Andy pinkerton gets $400 or $450 plus stripping. Call him at holbrookperformance. And for those who hate Donnie Holbrook he hasnt been around in quite a few years plane crash unfortunately.
     
    #4
  5. Bjs344

    Bjs344 Member

    Joined:
    Sep 10, 2013
    Messages:
    355
    Likes Received:
    24
    Fowler was well under 500 total out the door but that was a couple years ago
     
    #5
  6. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,416
    Likes Received:
    16
    PSI was always really expensive on labor when I called them a few years ago. Now sure on what they would charge but Fowler, SSI, Or Andy at Littlefield would be good. Critchley at Hammer is also good. I did my old LF k8 for $300 with a friend doing the lathe work dirt cheap but this was in like 2008 or so. $400-$500 seems realistic for blacks and whites with seals and no ceramic bearings.

    Best wishes,
    Trev
     
    #6
    TADHemiracer likes this.

Share This Page