ngk plugs

Discussion in 'PSI Superchargers Tech Questions' started by Full Tilt, Jan 18, 2019.

  1. Full Tilt

    Full Tilt Member

    Joined:
    Jan 3, 2014
    Messages:
    70
    Likes Received:
    1
    currently use 6061-10 , do anybody use autolight and have a number for them
     
    #1
    Full Tilt, Jan 18, 2019
  2. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    Would not recommend Autolite plugs because the base circle will not color so you cannot read the plugs. There are cheaper NGK plugs available that read well and are cheaper if you are interested
     
    #2
    Mike Canter, Jan 18, 2019
  3. Full Tilt

    Full Tilt Member

    Joined:
    Jan 3, 2014
    Messages:
    70
    Likes Received:
    1
    thanks mike, do you know of a good spot to buy ngk,s
     
    #3
    Full Tilt, Jan 18, 2019
  4. lucky2wd

    lucky2wd Member

    Joined:
    Jan 24, 2004
    Messages:
    161
    Likes Received:
    0
    ngk b10es $1.45 rockauto
     
    #4
    lucky2wd, Jan 19, 2019
  5. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    That NGK B10ES is a good blower plug.
     
    #5
    Mike Canter, Jan 19, 2019
  6. jay70cuda

    jay70cuda Well-Known Member

    Joined:
    Sep 30, 2009
    Messages:
    1,139
    Likes Received:
    35
    What’s the difference between that and a ngk10 or 11 ? I mean if it’s so cheap why isn’t everyone running them?
     
    #6
    jay70cuda, Jan 19, 2019
  7. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    10 or 11 is just the heat range of the plug. If you mean what is the difference between a B10ES and. 6061 plug then it is the length of the ground strap. The 6061 has a very short ground strap so it doesn’t get as hot on the tip as a B10ES so less change of it heating up like a glow plug and prematurely igniting the mixture as in preignition. Not sure I would ever run the mixture that lean in a normal tuneup but if you loose a intake pushrod so you shut off a cylinder causing the boost to increase on the other cylinders causing them to go lean and detonate the short ground strap my save the engine
     
    #7
    Mike Canter, Jan 19, 2019
  8. kosky racing

    kosky racing Comp Eliminator

    Joined:
    May 11, 2003
    Messages:
    899
    Likes Received:
    49
     
    #8
    kosky racing, Jan 19, 2019
  9. kosky racing

    kosky racing Comp Eliminator

    Joined:
    May 11, 2003
    Messages:
    899
    Likes Received:
    49
    There are also design changes in the for presure ring sealing
     
    #9
    kosky racing, Jan 19, 2019
  10. Full Tilt

    Full Tilt Member

    Joined:
    Jan 3, 2014
    Messages:
    70
    Likes Received:
    1
    thanks for the info
    blain
     
    #10
    Full Tilt, Jan 19, 2019

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM