Lots of New/Used parts...Hussey/Manton/EM/MSD/...they gotta go

Discussion in 'Noonan Classifieds' started by Cdn526, Sep 30, 2018.

  1. Cdn526

    Cdn526 Member

    Joined:
    Dec 12, 2006
    Messages:
    535
    Likes Received:
    5
    NEW Clark / Hussey Head gaskets:
    4.375 bore: 2 x .037; 4 x .042; 3 x .046; 3 x .048; 2 x .050; 2 x .055; 1 x .056; 4 x .060; 2 x .065;
    4.250 bore: 8 x .040
    $500 for the lot

    NEW RacePak EGT set for one side, includes assembled junction box/ 4 EGT's $500
    (plus one used set, tested okay, goes w/ new one at N/C)

    NEW Brooks TF Rods, 8 of 7.470" $320; 12 of 7.360" $480
    Take both sets of rods for $650

    New Moore 41 Spline drive shaft, 12" OA, 4" of spline one end, 2" of spline at other end. $100

    New MSD 8972 ProMag Controller $150

    New RCD Crank Trigger LH & RH brackets, w/ pointer, for BAE block. $100
    New RCD Faceplate Starter Mount p/n 103507-04 $40

    New/Used MANTON Solid Tool Steel Push Rods, all 1/2" x 7/16" taper, all dead straight, perfect shape, no damaged tips.
    Note* all lengths are overall, and for 3/8" adjusters
    14 of 11.860" (some are new) $250
    15 of 11.660 $200
    5 of 11.94 $100
    12 of 11.822 (8 used 4 runs, 4 new) $300
    9 of 11.770 (all new) $250
    also, set of 14 of 12.00", 7/16 straight, for 5/16" tip. $100 set
    Take the whole lot for $950

    Used: Two sets of 8 Morel TF 1" lifters, .920 dia roller, exh side has dble rollers $250 a set, $400 for both.

    Used MSD Programmer Monitor, p/n 7550, $120

    Used EM Tach/Timing Module w/ pick-up & display $100
    Used EM 4 pole air log (use it w/ EM timer units for controlling 4 air powered circuits) $150

    Starret Tru-Stone Granite Plate, 18" x 18" x 4", Grade A, $250

    I'll be at the Dallas (Oct 5-7) & Vegas (Oct 26 - 28) Nat'l events ; can bring parts along.

    UPS shipping out of MN 56735

    Thanks!
    Clif Bakx
    204.381.7869
    cb@nitrobull.ca
     
    #1
    Last edited: Sep 30, 2018
  2. Cdn526

    Cdn526 Member

    Joined:
    Dec 12, 2006
    Messages:
    535
    Likes Received:
    5
    7.360 rods sold
    Thanks!
     
    #2
  3. Brian Gawlik

    Brian Gawlik New Member

    Joined:
    Jan 19, 2018
    Messages:
    20
    Likes Received:
    0
    Willing to sell just head gaskets seperate vs whole lot ?
     
    #3
  4. Cdn526

    Cdn526 Member

    Joined:
    Dec 12, 2006
    Messages:
    535
    Likes Received:
    5
    certainly, which ones would you like?
    if possible,can you text me direct? not always by the pc
    204.381.7869
    Clif
     
    #4
  5. secondwindracing

    secondwindracing top alcohol

    Joined:
    Feb 10, 2004
    Messages:
    2,894
    Likes Received:
    7
    hello..do you know about how many runs on your lifters..thanks dave 620-249-5909 feel free to call or text me
     
    #5
  6. Cdn526

    Cdn526 Member

    Joined:
    Dec 12, 2006
    Messages:
    535
    Likes Received:
    5
    lifters are sold pending payment
     
    #6

Share This Page