Lots of New/Used parts...Hussey/Manton/EM/MSD/...they gotta go

NEW Clark / Hussey Head gaskets:
4.375 bore: 2 x .037; 4 x .042; 3 x .046; 3 x .048; 2 x .050; 2 x .055; 1 x .056; 4 x .060; 2 x .065;
4.250 bore: 8 x .040
$500 for the lot

NEW RacePak EGT set for one side, includes assembled junction box/ 4 EGT's $500
(plus one used set, tested okay, goes w/ new one at N/C)

NEW Brooks TF Rods, 8 of 7.470" $320; 12 of 7.360" $480
Take both sets of rods for $650

New Moore 41 Spline drive shaft, 12" OA, 4" of spline one end, 2" of spline at other end. $100

New MSD 8972 ProMag Controller $150

New RCD Crank Trigger LH & RH brackets, w/ pointer, for BAE block. $100
New RCD Faceplate Starter Mount p/n 103507-04 $40

New/Used MANTON Solid Tool Steel Push Rods, all 1/2" x 7/16" taper, all dead straight, perfect shape, no damaged tips.
Note* all lengths are overall, and for 3/8" adjusters
14 of 11.860" (some are new) $250
15 of 11.660 $200
5 of 11.94 $100
12 of 11.822 (8 used 4 runs, 4 new) $300
9 of 11.770 (all new) $250
also, set of 14 of 12.00", 7/16 straight, for 5/16" tip. $100 set
Take the whole lot for $950

Used: Two sets of 8 Morel TF 1" lifters, .920 dia roller, exh side has dble rollers $250 a set, $400 for both.

Used MSD Programmer Monitor, p/n 7550, $120

Used EM Tach/Timing Module w/ pick-up & display $100
Used EM 4 pole air log (use it w/ EM timer units for controlling 4 air powered circuits) $150

Starret Tru-Stone Granite Plate, 18" x 18" x 4", Grade A, $250

I'll be at the Dallas (Oct 5-7) & Vegas (Oct 26 - 28) Nat'l events ; can bring parts along.

UPS shipping out of MN 56735

Thanks!
Clif Bakx
204.381.7869
cb@nitrobull.ca

 

7.360 rods sold
Thanks!

 

Willing to sell just head gaskets seperate vs whole lot ?

 

certainly, which ones would you like?
if possible,can you text me direct? not always by the pc
204.381.7869
Clif

 

hello..do you know about how many runs on your lifters..thanks dave 620-249-5909 feel free to call or text me

 

lifters are sold pending payment