New true billet NRE parts for sale: Block, Gear drive, Roots intake, and Valve covers

NOW CONSIDERING TRADES, SEE BOTTOM

-New true billet NRE block, Front mounted oil pump design (No more knocking the oil lines off with a rod)
1/2" Short deck
4.5" Bore
2" Spread lifters
1" Lifter Diameter
65mm Babbit cam (Can go to 60 mm roller by changing bearings)
O-ringed decks for the ultimate in sealing
Main, gear drive, oil pan, and bell housing studs included
-New NRE front oiler billet gear drive w/ crank support bearing for the above block
$9,000 +Sh FIRM (Cost $10,450 new)

-New Pair of super trick Billet valve covers (Machined aluminum finish)
Aluminum o-ringed captive nuts
Handles for pulling the covers off
$1,800+Sh FIRM (Cost $2,400 new) Will take $1,500 if purchased with block or intake. Will knock even more off if you buy the block, covers, and intake!

-New NRE billet intake (Picked up 60 HP on the dyno over BAE as Per Jamie)
Roots design
Can be used as digital or std injection with adapters (Not included)
Comes w/ NRE fuel rails
Carbon belly tray to keep hot oil off the intake
Phenolic spacers to keep heat from the heads from transferring into the intake
-Spare quick release burst panel (4 bolts and the whole assy is changed)
$5,000 (Cost $5,750 new)

Package deal may be possible

All new and best of all no waiting.

Buyer picks up or pays shipping from 34610 Cash, Money orders, or bank transfer only.

This engine takes all off the shelf fathead parts save for the gear drive and the oil pan. Olson sells the pans or NRE will send the pattern to a company of your choosing. Intake is currently at Rage fuel systems in SC and would ship from there.
---------------------------------------------------------------------------------------------------
TRADES CONSIDERED: All trades would have to be straight up in value (Or very close to it) or for if your trade is lesser in value you would have to provide a cash difference.

Nice blower K-11/F-11 non modded or modded, possibly SSI F-3 or later

-New Bryant billet 4.150 Crank (Will have to find out what bob weight I need)

-3 spd Lenco, needing 1.25*1.25 gear sets would take other gear sets but the price would have to be lower as I would have to trade them in.

Center section w/ 1480 yoke and 10" 4.56 gears, pref new gears and billet case but would consider Strange ultra cast cased setup

-70 Plymouth (2 door) Satelite, Roadrunner, or GTX, 71 Roadrunner, 1969 Dodge charger possibly a 68, 1968 to 1970 GTO or Lemans, 71 Cuda, 70 Challenger, 70 Buick GSX or Gran Sport, 67-70 Mustang fastback. Tri 5 Chevy's, Others possible just ask.

Calling or emailing is best as I don't always notice the ITA PM's.

Thanks,
Trevor Sherwood
727-364-4368
Soldierboy0098@yahoo.com

 

Would you sell heads and covers seperate ? PM'd you

 

Do you have any pictures of the valve covers can you text them to me 620-874-5109 Curtis

 

Sure, I can send some later today. They are works of art.
Thanks,
Trevor Sherwood

 

to the top

 

Bump it up please

 

can you send me some pics of the valve covers please

 

Sure, I would need your email address They may be pending a sale and should know something soon.

 

jason@outlawraceengines.com

 

Valve covers are still available

 

Bump it up please

 

Trevor is block solid or the water version?
How complete is the deal
I have a original 71 Roadrunner 383 4spd my first ever car!

 

Hi, Solid as a rock. No water jackets. Thanks

 

Hi, solid as a rock, no water jackets. Not sure what you mean on how complete, best to give me a call and discuss. 727-364-4368. I Will be available from Friday to Monday, and from 10-3 pm tues through thurs

 

want to purchase valve covers if available

 

Hi Don, just noticed your message, I rarely catch them so calling is usually best. They are still available please give me a call at 727-364-43Six8. Thanks Trev