Outlaw promod operation

Discussion in 'Noonan Classifieds' started by overkill69, Feb 21, 2018.

  1. overkill69

    overkill69 Member

    Joined:
    May 17, 2005
    Messages:
    826
    Likes Received:
    0
    2000 corvette outlaw/screw promod

    Originally Stroupe 113 inch 25.1 chassis, Updated by Jeffers, Bickel, Myself

    4130 Jeffers rear housing with Strange floater and 9.5 4.86 ultra center

    New back half 85% complete, big 4 link, 3 inch anti roll.

    69 Inch single wheelie bar

    Lightened 16x16 beadlocks

    Suncoast glass body with carbon front clip and mold

    Santhuff shocks/struts

    RPM datalogger with dash,flowmeter shock travel and all the standard channels

    4 stage fuel management and timers

    Power Grid with arc box and System 1 promag 44

    Room for 6 ft+ driver


    Bruno Drive with deep pan and numerous mods ,3 speed CS2 lenco setup as 2 spd with 1.41 low

    Chance NXS converter with multiple stator combos


    BAE 5 .100 tall 521 hemi

    2007 block and promod legal heads

    Block has 1 main repair from BAE, no windows.

    4.150 stroke splined Bryant crank, no runs since mag,not perfect but usable per Bryant

    New MGP rods

    Bullet custom grind cam

    Reid hi ratio rockers low runs

    KJS triple springs

    Shortblock is assembled fresh and ready to run

    Heads off for inspection

    Carbon bucket

    PSI c rotor with modified lower plate and Waterman .900 pump, 11mm drive and several pulley combos around 129%


    Trailer is 37ft S&S with sink ,shower, generator, compressor, heat/AC and nice cabinets with tool box. It will hold the car,a fuel drum,golf cart and pit bike.

    We would like to sell the entire operation including fire suit for 6ft 195 lbs, lap top, weather station ,fuel system software, Yamaha golf cart, pro jacks and all engine servicing tools and spares. This is a 17 year racing effort coming to an end and you will have EVERYTHING we needed to run the car.

    The back half of the chassis needs completed (it rolls) and SFI parts will need recert.
    Best et 3.76@201 mph at 2530 lbs

    80,000.00

    Partout prices
    Turnkey bae hat to pan, ignition, fuel and starter with spares and tools. 38k

    Bruno Lenco with blanket, , ,air shifter, pit cooler,spares, nxs converter with 3 stators, 7k

    Rolling chassis with data logger firesystem etc. not stripped. 25k.

    Trailer has to go last. 10k
     
    #1
    Last edited: Mar 14, 2018
  2. overkill69

    overkill69 Member

    Joined:
    May 17, 2005
    Messages:
    826
    Likes Received:
    0
  3. overkill69

    overkill69 Member

    Joined:
    May 17, 2005
    Messages:
    826
    Likes Received:
    0
    Lowered prices
     
    #3
  4. overkill69

    overkill69 Member

    Joined:
    May 17, 2005
    Messages:
    826
    Likes Received:
    0
  5. overkill69

    overkill69 Member

    Joined:
    May 17, 2005
    Messages:
    826
    Likes Received:
    0
    Cash talks. Make An offer
     
    #5
  6. cheyenne

    cheyenne Member

    Joined:
    Jul 4, 2011
    Messages:
    99
    Likes Received:
    3
    How much for the power grid?
     
    #6
  7. cheyenne

    cheyenne Member

    Joined:
    Jul 4, 2011
    Messages:
    99
    Likes Received:
    3
    price?
     
    #7
  8. overkill69

    overkill69 Member

    Joined:
    May 17, 2005
    Messages:
    826
    Likes Received:
    0
    new prices
    Turnkey engine 34k
    Everything except trailer 54k
    Entire operation 60k
     
    #8
  9. overkill69

    overkill69 Member

    Joined:
    May 17, 2005
    Messages:
    826
    Likes Received:
    0
    everything sold pending payment. Thanks ITA for everything over the years!
     
    #9

Share This Page