WTB - BBC parts

Looking for the following parts for BBC blown alky, figured id check around before buying new, just a small shopping list, but never now whats out there

- Dart Big M tall deck, would also consider a rodeck
- 6.535 aluminum rods, std sizes on both ends
- Milodon gear drive, std height w/fuel pump drive
- 4.25 stroke crank
- titan or similar oil pump
- JE pistons - 257976
- front mag drive and base
- titanium valves
2.40 x 5.650 x 11/32, .250 tip
1.90 x 5.450 x 11/32, .250 tip
- Triple springs
1.650 dia 2.100 installed height, capable of .850 lift

 

Interested in a brand new Chuck Nuytten 10.2 billet block? Have that, couple sets of AJ BBC billet heads and pretty much anything needed for a Blown Alcohol BBC. PM me if interested.

 

I should have a good bit of the stuff that’s on your list , I will try to make it to the shop this morning and get some pictures and some prices together for you , some is new some is used .

 

any updates kythunder?

 

Text me pics and prices on CN block and heads 708-296-1300

 

I have a dual drive for mag and pump if interested? Also many boxes of triple springs. 450-500#'s

 

I have complete set up you are looking for, all new parts,M blk,bryant crank,miloden dr,20 amp MSD mag,everything has 7 passes,send a contact number. thanks