Drivetrain parts, Lenco drive, Carbon driveshaft, Cans, Converters, coolers, ect..

Lenco drive unit (Ex Anderika) (No trans) with a ridiculous amount of spares including hard parts such as a valve body. Snyder bypass valve. Pro bell aluminum can or Steel can, DMPE (non cracking) aluminum flex plate, Spare Reactor flex plate. Trans cooling setup, Lenco 3 spd blanket (Not for Lenco drive but can be traded in towards one) and your choice of converter setups. With a Chance billet aluminum NXS converter and Spare half to make it non NXS $6,500 or with a Trans Specialties Steel converter that actually went slightly faster in TAFC $4,500, or with a Coan steel converter out of a roots BBC pro mod that went 4.20's for $3,900. Subtract $800 if you want the steel can. I can also send this into Snyder and have him complete it and assemble it with whatever gear sets you want as a 2 or 3 spd for whatever Mick would charge me. I will contact Mick and get a price for a serious inquirer but as a rough idea it would cost around $4,500 for a 3 spd.

New in the box Browell steel can for Lenco drive/Hemi. Cost $1,400 new sell for $700. Was for a project that fell through.

Spare trans cooling setup, Homemade but worked great, I just replaced all of the seals,gaskets on the pump, comes with 3 trans coolers daisy chained together, hoses/lines, threaded rods, a tilton pump, a large blower motor, and I can sell it with or without a cheap cart that it came with (Cart needs paint) $250+sh w/o the cart, $300+sh with it. Note with the cart it will be harder and more expensive to ship due to size.

New PST Carbon drive shaft w/ 1480 U-Joint and Strange short yoke 45 5/8 center to center +/- 1/8" Was for 2 spd Lenco drive in my 63 Vette Pro mod, I run a 3 spd so it will not work for me. Cost $1,700 new will sell for $1,200 + sh

See my other ads for a pro mod rolling chassis and engine/misc parts

Calling, texting, or emailing is best as I may not catch the messages on ITA.

Thanks,
Trevor Sherwood
727-3six4-436eight (Keeps auto dialers and scammers away)
Soldierboy0098@yahoo.com

 

Can you please send pics to aayoung392@yahoo for the tool tray thanks. Anthony

 

Any chance you can email pictures of the puke tank? PaulV0321@hotmail.com

 

Tool tray pictures to funnycar2400@gmail.com

 

hi interested in the pistons and tool tray you can call me at (918)366-6050 thanks

 

I’m very interested in the can. Can you send pics of the opening and depth measurement. mthomp392@yahoo.com or 951 314-6544

 

Hi Mike, Just saw your message on here. Calling or emailing is always best but I will get you some pics of the can first thing tomorrow and give you a call. The opening is for a Lenco drive and the depth is std Lenco drive which should be 7.2" It is new in box. Thanks -Trev

 

bump it up

 

Lencodrive is staying, can and driveshaft still available.

 

Can and driveshaft still available

 

Bump it up, can and driveshaft still available

 

Bump it up

 

New Browell Can still for sale

 

Can and trans cooling setup still available

 

Can and trans cooling setup is still available

 

I have the Browell Can, Pro Bell Can, and Trans cooling setup still available.