Huge MBR/Fontana Sale -Heads, parts and more

MBR/Fontana Engine/Parts Sale
Formerly campaigned by the late Ed Schmeekle. Been as quick as 5.28 in TAD trim.

Velasco 3.750 MBR/Chevy Crank - $1500

Accusump - $150
Olson oil pan - $275

RCD Blower Belt Guard for PSI - $100
MBR intake gaskets(3) - $5 ea
MBR copper header gaskets(4) - $30 ea
MBR 4.500 .071 Head Gaskets - Hussey (1) - $40 ea
MBR 4.500 .051 Head Gaskets - Clark (4) - $40 ea
MBR 4.500 .050 Head Gaskets - Clark (4) - $40 ea
MBR 4.500 .045 Head Gaskets - Clark (1) - $40 ea
PSI Old style snout (3.30" diameter) - $200
Used quill shaft (4.025" OAL) - $50
6 bolt 3.5" starter dog - $50
40t 8 mm GT blower pulley - $50
Waterman vane style fuel pump (needs repair) $350
Blue stand rockers - complete side assembly $750 OBO
Blue rocker stands(5) - $50 ea OBO
Fontana mag intake - short - $1200
Fontana mag intake - tall - $1200
Taylor MBR engine diaper (2) - $500 ea
System 1 filter element - used - $50
XRP -12 oil line straight to 90 - 18.5" - new - $30
RCD 91t pulley - new - $150
RCD 91t pulley - used $100
PSI Conical Crank support w/ bolt - $100
RCD/Gates 1792-75-8mm PS belts - new - (3) $175 ea
MBR intake rockers - new (8) - $110 ea
MBR Exhaust rockers - new (7) - $120 ea
GRP Rods - 5 runs 6.826 - set of 8 - $400
Used buttons (several sets) - $150
Velasco 3.750 Crank - used rods/mains .010 under - $1000
Olson MBR Dragster Headers - repaired - $250 set
MBR Intake rockers - used (2) - $65 ea
MBR Exhaust rockers - used (11) - $75 ea
Fontana/Arais steel exhaust rockers (6) $50 ea
Fontana/Arais steel intake rockers (4) $50 ea
2" aluminum blower spacer for PSI Screw - $250
RCD Pump Extension - new - $400
Barnes oil pump - flange drive for billet -new - $695
RCD hub for billet cover/bearing support -new - $300
RCD hub for billet cover/bearing support -used - $150
.904 Isky Lifters (same as Chrysler Hemi) - used - (7) $30 ea
Clevite Main Bearing set new - MBR - PN MS829VXN - $95
Hellfire Top Rings 4.500 - new (23) $16 ea ($255 a set of 8)
Hellfire Second Rings - new (15) $5 ea
RCD Blower Belt Guard for PSI screw - used (3) $85 ea
Fontana/MBR Burst panel cage/adaptor for intake (3) $50 ea
RCD idler bracket (for MBR/Chevy) - new w/ used pulley $600
RCD idler pulley w/ 8mm teeth - used $100
Throttle linkage arms w/ stops (3) $15 ea
Barrel valve turnbuckle $10
Bin Head studs/nuts - used - $200 for all (pic avail)
Manton 3/8 adjusters 5/16 ball - new (8) $10 ea
Bin used intake/exhaust push rods $150 for all (pic avail)
RCD Fuel Pump drive shaft - new (2) $50 ea
RCD Billet oil pump clamp - new $100
Bin Valve train hardware $100 (pic avail)
Bin Engine studs/nuts $200 (pic avail)
Sealed Power Main Bearing set -.010 under - (2) $75 set
Clevite Lower Rod Bearing (V) Tray (30) -$165 for tray
Clevite Lower Rod Bearing (V) - (15) - $6 ea
Clevite Upper Rod Bearing (V) - (9) - $6 ea
Clevite Upper/Lower Rod bearing pairs -.010 (14 pair) $12 ea
Clevite Rod Bearing sets V (2 set) - $100/set
MBR Rear Main Seal - new - (2) $20
PSI Supercharger bearing - new - $20
25t 14 mm pulley - $40
25t 13.9 mm pulley $40
86t 8mm pulley - used - $100
Taylor rear restraint bracket & pin (alum) - $30
Taylor rear blower restraint strap - new - $40
Blower restraints - used (lot) - $75 (pics avail)

Many pics available for text/email

Will Hanna
979.415.4959 (no calls/texts after 9 p.m. CST)
will.hanna@insidetopalcohol.com

 

No. This is for a Arias, Fontana, Miner Bros. Hemi.