PARTS

Vanishing Point 68 Firebird, Set up for Hemi,Lencodrive, Complete Roller $43k
Complete PSI D with tall JBR Injector, bag restraint, Waterman pump and hoses $12500
Motor #1
BAE 521 100 tall 4.471 bore 4.150 Bryant Crank , AJ Muscle heads, Manton Reid Rocker assembly
RCD angle mag drive, RCD idler BAE intake Dry sump Plueger Pump
JESEL lifters New GRP rods and bearings
Complete and fresh $23k
Motor #2
BAE 521 100 tall 4.471 bore 4.150 Bryant Crank (3 runs since new) AJ Muscle heads ,Manton Reid Rockers
Rcd angle mag drive, RCD idler, Dry sump with Plueger Pump
Jesel lifters, 3 run GRP rods and bearings
Ready to run $22k
Motor #3
BAE 521 100 tall 4.471 bore 4.150 Bryant crank , AJ Muscle heads, Manton Reid rocker assembly
Jesel lifters, RCD angle mag drive, RCD idler, Dry sump with Plueger pump, BAE screw intake,
Getting freshened now , Complete $23k
Motor #4
BAE short deck 477in, 4.467 bore 3.850 Bryant crank(2 runs) New GRP rods, new bearings,Aries pistons, Crane cam and lifters, head studs, Billet KB wet pump, Moroso pan, RCD idler assembly
PSI offset mag drive,
Complete short not run since assembled. 1 small window, no saddles.
$15k with spares

Parts
3 wet sump dragster pans $300 ea
MSD 44 mag, box and coil (hemi) $2000
MW 11in centre with 4,56 gear $1200
Strange Ultra Centre Live Axle, 9 1/2 4.30 gear $1200
Trick Ti Bell with cross shaft and sensor,(hemi) $1500 SOLD
CS2 3 speed with 1.25 and 1,31 blanket and pods $3000
CS2 ratios 34 and 56 $750 ea.
New CS2 big sprags $500ea.
CS1 ratio 34 with drum and clutchs $650 SOLD
Coan Super Mega Convertor 1 1/4 spline,27,30,32 35 Stators $1500

Thanks Bruce 905 978 1863 LCOLLINS@COGECO.CA

 

TTT PLEASE

 

I sent you an email

 

ttt please

 

Sent your an email

 

info on your msd 44 set up is the box with rev limiter