UPDATED 8x Heads, Gears,Manifold and misc

Complete from Pan to Intake Manifold 470 TFX96 Block with AJPE old Fuel head Engine

Engine has 8 new GRP rods, New Rings, New Bearings with Arias Piston ,Crower Crank,Bullet Cam
Stage 5 Rockers and Stands, Manton Pushrods,Manley Valves,Springsand Retainers,Stage 5 Valve Covers ,RCD Timing Cover ,Pump Extension,Oil Pump (basicly just need a Supercharger, Mag and a fuel system and it`s ready to run)


Other left Overs

1 x Lenco CS2 1.44 Gear set (used)
1 x Lenco CS2 1.65 Gear Set (new)

1 x RCP / P&P Dual Stage Oil Pump 600$ (used But in like new condition,NO scratch)

1 x MSD 8132 tach Converter 40$ (new)
2 x MSD 8134 Kill Solenoids 30$ each

1 x Starter/Engine 6 Holes Starter Jaw 40$
3 x Lakewood 15975 Pilot Bearings (1 new 3 used) 25$
1 x ISKY Big Block Chevy Roller Cam and 2 SETS of Lifters 290 / 304 Duration 275$

Pricing is in US $
Pictures will be available
We can send the parts to you or can arrange transport in some part of the US
Either get in touch with us here or E-Mail info at Atelierhp.com

 

hey there what size is the wrist pin in the 4.375 piston

 

1.100"

 

Engine sold and spare parts sold

updated list of what's left

1 x Magnesium Intake manifold for -.500 block and fuel heads

1 x Set of Zoomies for fuel heads

1 x Lenco CS2 1.44 Gear set (used)
1 x Lenco CS2 1.65 Gear Set (new)

1 x RCP / P&P Dual Stage Oil Pump 600$ (used But in like new condition,NO scratch)

1 x MSD 8132 tach Converter 40$ (new)
2 x MSD 8134 Kill Solenoids 30$ each

1 x Starter/Engine 6 Holes Starter Jaw 40$
3 x Lakewood 15975 Pilot Bearings (1 new 3 used) 25$
1 x ISKY Big Block Chevy Roller Cam and 2 SETS of Lifters 290 / 304 Duration 275$

Pricing is in US $

 

Updated List and Pricing

1 x Pair of BAE 8X heads Alcohol single spark plug Complete with Victory titanium valves (2.450 & 1.900) and Manley springs 1 run since they're back from BAE 5500$ pair

1 x Magnesium Intake manifold for -.500 block and fuel heads
(Keith Black Cut down and welded by WAR) 1200$

1 x Set of Zoomies for fuel heads has been repaired 150$

1 x Lenco CS2 1.44 Gear set (used)
1 x Lenco CS2 1.65 Gear Set (new)

1 x RCP / P&P Dual Stage Oil Pump 600$ (used But in like new condition,NO scratch)

1 x MSD 8132 tach Converter 40$ (new)
2 x MSD 8134 Kill Solenoids 30$ each

1 x Starter/Engine 6 Holes Starter Jaw 40$
3 x Lakewood 15975 Pilot Bearings (1 new 3 used) 25$
1 x ISKY Big Block Chevy Roller Cam and 2 SETS of Lifters 290 / 304 Duration 250$

Pricing is in US $
Contact here or by e-mail info at AtelierHP.com

 

Can u send picks oil pump
254-592-1302 thanks Brandon

 

Pics sent to your phone Brandon

 

Made a typo in the gear sets
we have 1 x 1.44 Cs2
2 x 1.56 Cs2

 

Just found out we have 2 x 1.56 CS2 gear sets
Inner part 32 Splines (planetary)
Outer Gear 35 Splines (ring gear)

 

Oil Pump Sold pending payment
1 1.56 Gear set sold pending payment

 

Updated List and Pricing

1 x Pair of BAE 8X heads Alcohol single spark plug Complete with Victory titanium valves (2.450 & 1.900) and Manley springs 1 run since they're back from BAE 5300$ pair

1 x Magnesium Intake manifold for -.500 block and fuel heads
(Keith Black Cut down and welded by WAR) 1100$

1 x Set of Zoomies for fuel heads has been repaired 75$

1 x Lenco CS2 1.44 Gear set (used)
1 x Lenco CS2 1.56 Gear Set (new)


1 x MSD 8132 Tach Converter 40$ (new)
2 x MSD 8134 Kill Solenoids 30$ each

1 x Starter/Engine 6 Holes Starter Jaw 40$
3 x Lakewood 15975 Pilot Bearings (1 new 3 used) 25$ for the 3
1 x ISKY Big Block Chevy Roller Cam and 2 SETS of Lifters 290 / 304 Duration 240$

Pricing is in US $
Contact here or by e-mail info at AtelierHP.com

Also, we're looking for a 75T 8mmGT flat faced pulley and a PSi pulley clamp and bolt kit

 

Updated List and Pricing

1 x Pair of BAE 8X heads Alcohol single spark plug Complete with Victory titanium valves (2.450 & 1.900) and Manley springs 1 run since they're back from BAE 5300$ pair

1 x Magnesium Intake manifold for -.500 block and fuel heads
(Keith Black Cut down and welded by WAR) 1100$

1 x Set of Zoomies for fuel heads have been repaired 75$

1 x Lenco CS2 1.56 Gear Set (new)


1 x MSD 8132 Tach Converter 40$ (new)
2 x MSD 8134 Kill Solenoids 30$ each

1 x Starter/Engine 6 Holes Starter Jaw 40$
3 x Lakewood 15975 Pilot Bearings (1 new 3 used) 25$ for the 3
1 x ISKY Big Block Chevy Roller Cam and 2 SETS of Lifters 290 / 304 Duration 240$

Pricing is in US $ Open to deal on some parts
Contact here or by e-mail info at AtelierHP.com

Also, we're looking for a 75T 8mmGT flat faced pulley and a PSi pulley clamp and bolt kit

 

is the starter jaw for a roots or screw mini snout