Auto cooler help

Discussion in 'PSI Superchargers Tech Questions' started by jay70cuda, Mar 21, 2017.

  1. jay70cuda

    jay70cuda Well-Known Member

    Joined:
    Sep 30, 2009
    Messages:
    1,139
    Likes Received:
    35
    Anyone have blue prints how to build a converter drive cooler. Pros or cons to ones you can buy. Should I look for used one?
     
    #1
    jay70cuda, Mar 21, 2017
  2. mogenss

    mogenss Member

    Joined:
    Feb 4, 2012
    Messages:
    119
    Likes Received:
    3
    I have made one that is mounted permanently on the trailer. It is an old cooler unit from a crane with air/air cooler, pump, motor in one unit. The lines are plumbed on the trailer with quick disconnects so I can hook the hoses on the trailer and the transmission and flip a switch.

    It takes about 15-20 mins to cool the trans and converter to just above ambient temp.
     
    #2
    mogenss, Mar 22, 2017
    nitrowannabe likes this.
  3. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    We use one sold by Mick Synder at Synder Motorsports. It is a wheeled ice chest with a handle and attached to the outside is a 115volt pump and has a transmission cooler inside. We fill it with water and ice. The hoses have Jiffy Connectors on the end. It works very well and is simple and reliable.
     
    #3
    Mike Canter, Mar 22, 2017
  4. td3829mk

    td3829mk Member

    Joined:
    Dec 31, 2015
    Messages:
    180
    Likes Received:
    19
    Mike, what's the fluid temp after "x" amount of time that you normally let the cooler run? I'm familiar with the unit that Mick sells, just seems like it would chill the fluid too much. Do you control fluid temp with cooling time or the amount of ice/water you put in the cooler?
     
    #4
    td3829mk, Mar 22, 2017
  5. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    Never have timed it or measured the temps. We grab hold of the line coming from the Bruno unit and when it feels like ambient temperature we disconnect it. Usually by the time we run again it has probably totally settled down to ambient temps. We use that RedLine racing light weight ATF which is a synthetic fluid so that is pretty stable on viscosity.
     
    #5
    Mike Canter, Mar 22, 2017
  6. Charles Stewart

    Charles Stewart Member

    Joined:
    Jul 30, 2008
    Messages:
    61
    Likes Received:
    0
    #6
    Charles Stewart, Mar 23, 2017
  7. dragster156

    dragster156 Member

    Joined:
    May 31, 2012
    Messages:
    143
    Likes Received:
    4
    #7
    dragster156, Oct 25, 2017
  8. nitrowannabe

    nitrowannabe Member

    Joined:
    Oct 9, 2006
    Messages:
    414
    Likes Received:
    20
    Saw quite a few Kool Solutions coolers at PDRA last weekend. Give it a Google.
     
    #8
    nitrowannabe, Oct 25, 2017
  9. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    133
    we built one for the top dragster. We bought a hot oil gear pump off amazon, and put 3 jegs trans coolers (with fins) in an ice chest. plumbed with an inline filter to clean as it cools. We recently tapped into the converter charge port on the lencodrive and it gets the drive and converter cool very quick.

    in top dragster it is not uncommon to only have 18-20 minutes back at the pit and we can usually get the trans fluid back down to 110 in that time frame.
     
    #9
    Will Hanna, Oct 25, 2017
  10. jay70cuda

    jay70cuda Well-Known Member

    Joined:
    Sep 30, 2009
    Messages:
    1,139
    Likes Received:
    35
    Hey Will can you send me pics of that cooler you built? And what parts you used. Thanks. You have my email already.
     
    #10
    jay70cuda, Oct 27, 2017
  11. greenracing

    greenracing Member

    Joined:
    Jul 2, 2008
    Messages:
    74
    Likes Received:
    10
    Will,
    Would it be possible to provide a link to which pump you're using? When you do a search for hot oil gear pump you get such a variety, and I'm sure a lot of them will work, but I'd rather go with one that I know is proven to work.
     
    #11
    greenracing, Oct 30, 2017
  12. Nitro Madness

    Nitro Madness Super Comp

    Joined:
    Sep 14, 2003
    Messages:
    359
    Likes Received:
    10
    Cooler Photos

    I would like to take credit for this design, but the original idea was from Bruce & Jared Micetich - Advance Transmission in Knoxville, Iowa - they designed this Lencodrive cooler and modified my valve body & case to accept quick disconnect dry-loc fittings....It flushes the fluid back through the converter and cools the trans to ambient temp withing a few minutes....it's 12 volt so ya gotta charge the battery between rounds....

    I just built this one similar to theirs and it works great!

    http://nitromadness.com/images/Cooler-1.JPG
    http://nitromadness.com/images/Cooler-2.JPG
    http://nitromadness.com/images/Cooler-3.JPG
    http://nitromadness.com/images/Cooler-4.JPG
    http://nitromadness.com/images/Cooler-5.JPG
    http://nitromadness.com/images/Cooler-6.JPG
     
    #12
    Nitro Madness, Oct 30, 2017
  13. greenracing

    greenracing Member

    Joined:
    Jul 2, 2008
    Messages:
    74
    Likes Received:
    10
    So the less expensive diaphragm pumps will live...
     
    #13
    greenracing, Oct 31, 2017
  14. jay70cuda

    jay70cuda Well-Known Member

    Joined:
    Sep 30, 2009
    Messages:
    1,139
    Likes Received:
    35
    Why 12 volt? Can’t I use a 110 pump and do same thing? Just seems like a real pain in ass for if you forget to charge it
     
    #14
    jay70cuda, Oct 31, 2017
  15. Nitro Madness

    Nitro Madness Super Comp

    Joined:
    Sep 14, 2003
    Messages:
    359
    Likes Received:
    10
    if I built one today I would go with 110V pump...
     
    #15
    Nitro Madness, Oct 31, 2017
  16. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    133
    #16
    Will Hanna, Oct 31, 2017
  17. 1320metalman

    1320metalman Member

    Joined:
    Feb 26, 2015
    Messages:
    39
    Likes Received:
    5
    When building your own
    Converter drive Tranny cooler
    Qwikest/easiest way to get the ball rolling on a pump that is a "KNOWN QUANTITY"
    You use the:

    Grainger pn#
    4UN25
    1/2hp
    For your ACTUAL Cooler pump

    Tony @ Q/D sold
    that pump p.n.# when he built them as i recall.

    Yes," plastic coolers are for soda & beer" lol

    & $2400 is for either your pocket, or someone elses,
     
    #17
    1320metalman, Oct 31, 2017

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM