WTB: Set of studs for BAE98 / BEA5 combo

Hi,

Anybody have a drawer full of studs they want to get rid off? No junk, but not looking to spend a fortune for a spare engine either.
BAE 98 (cast) block +100 with BAE 5 heads
Looking for as close to complete set:

• Headstuds 9/16 top & 1/2 bottom + inner head studs
  • 1 pce 9/16 UNC - 9/16 UNF 230 mm / 9"
  • 9 pcs 9/16 UNC - 9/16 UNF 280 mm / 11"
  • 16 pcs 9/16 UNC - 1/2 UNF 280 mm / 11"
  • 8 pcs 7/16 UNC - 7/16 UNF 105 mm / 4-1/8"
• Rocker gear
  • 20 pcs 3/8 UNC - 3/8 UNF 77 mm / 3"
• Valve cover
  • 14 pcs 1/4 UNC - 1/4 UNF 62 mm / 2-1/2"
• Exhaust
  • 24 pcs 3/8 UNC - 3/8 UNF 57 mm / 2-1/4"
• Head to manifold
  • 10 pcs 3/8 UNC - 3/8 UNC ? 82 mm / 3-1/4"
• Pan rail
  • 20 pcs 5/16 UNC - 5/16 UNF 42 mm / 1-5/8"
• Front
  • 4 pcs 5/16 UNC - 5/16 UNF 39 mm / 1-1/2"
  • 4 pcs 3/8 UNC - 3/8 UNF 50 mm / 2"
• Rear
  • 9 pcs 7/16 UNC - 7/16 UNF 63 mm / 1-1/2"

Going to check dimensions, but guessing this is more or less a standard combo.
Located in Europe, so will take some effort to box with paperwork unless you're in Europe of course.

Thanks,

Marcel

 

Figure out a length you need I have a 5 Gal pail full of new and used studs.

 

Do you have any Donovan 417 9/16 studs 14" long I need 10.

 

Thanks HooterFunnyCar.
I've added headstud lengths above, will have to check others next week when back in the shop.

Thanks,
Marcel

 

Are all the studs your looking for 1/2" top with 9/16 bottom

 

Hootersfunnycar
would you have some l19 studs with broached allen head
9 x 9/16 on both ends x between 9 5/8 to 10” long
1 x 9/16 on both x 9 1/8” long
We're in Canada also

Thanks!

 

Sorry I only have 2 in those lengths 9 7/8 ova not allen head broched

 

Only the lower row is 1/2" top with 9/16" bottom, but that still makes up 16 pieces.

 

We have plenty of those studs in Tool steel.

 

Thanks for the reply. Do you mean used or new? I've quickly checked your online shop but didn't see any tool steel studs or pre-owned items.
Please send me a PM and let me know.