bbc brodix bb3 cnc solid w copper urillium seats.complete

these heads were built in 2013 . they are hippa. they were cnc ported at brodix and had upgraded copper seats installed too. they have 2.350 manley titanium intake valves and iconel exhaust valves. PAC springs/locks/retainers...reciever grooved..they are solid, no water jackets. they have 20 passes on them.. they are virgin...never a thread pulled out of or anything ....they are like new condition... no surfacing or any repairs have been done to these heads......over 7k invested.... 4500 is the price and i pay shipping these heads were run on my KPE532 on the west and east coast in my pro outlaw texas outrigger lucas oil dragboat...im going a different direction with this 532 chevy now that i have made it to fuel............again these are a very nice set of heads ready for 2500hp+++++ in my opinion, the ideal head for serious conventional bbc blown combinations that use a 1471hh.... ihave a KPE582 also that gained 200hp just by going from bb2 to these heads..and we have dynoed many of this combo 2500hp + .. brodix head hunter and sr20 will perform a little better but they get pretty bastard trying to align ports on common intakes and rockers are special for them also.... bb3 and crower shaft rockers are a winning combo.......... lee warren 5807040467 pro448mod@hotmail.com

 

i scattered the heads to make sure all was well. they dont even need valves lapped. im going to surface them so if someone needs wire in head or just grooved, i will make it happen