pluger dry sump pump

Need to know which fittings from the pump go to remote filter. Looking at the pump from front of car there are two fittings one is higher then the other and the lower is located closer to the block. Which is IN and which is OUT?

Thanks

 

this might help:

http://www.insidetopalcohol.com/threads/help-on-a-plueger-billet-dry-sump.29723/

 

Where you have the stainless U pipe is where I have the filter installed. That's why I need to know OUT to the filter and IN from the filter. Like the idea of filtering oil going to tank.
Thanks.

 

Got hold of RBS and they sent me the sketch for pluming the oil filter. Bottom is IN from filter and top is OUT to the filter.
Thank you.

 

Can't help you there. I remember coming across that thread when I was looking into dry sump systems but decided to go with wet sump. Figured it might help you. For what it's worth, top fitting goes to the filter, bottom fitting comes from the filter on my wet sump.

 

^^just saw your post, good stuff!