INPUT SHAFT TRIGGER, WHEEL SPEED TRIGGER

Discussion in 'PSI Superchargers Tech Questions' started by shawn davis, Apr 14, 2005.

  1. shawn davis

    shawn davis Member

    Joined:
    Feb 27, 2004
    Messages:
    658
    Likes Received:
    0
    HOW CLOSE IS EVERYONE PUTTING THE INPUT AND PINION PICKUPS? GOR A NEW QUICKDATA, SINGLE MAGNET ON THE INPUT, AND CANT SEEM TO GET A READING ON EITHER, ANY IDEAS?
     
    #1
    shawn davis, Apr 14, 2005
  2. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    We run ours at around .100" but it will work closer at .060 also. Does your pickup require every other magnet to be reverse polarity. Some do an if they are not installed that way they will not work. What does the instructions say? If now instructions then maybe call Edelbrock
     
    #2
    Mike Canter, Apr 14, 2005
  3. Danny Humphreys

    Danny Humphreys Member

    Joined:
    Aug 4, 2003
    Messages:
    489
    Likes Received:
    0
    Shawn, call me Friday @ 214-724-1056 I've got a few ideas to try on the qwikdata Danny Humphreys
     
    #3
    Danny Humphreys, Apr 14, 2005
  4. G man

    G man New Member

    Joined:
    Feb 22, 2005
    Messages:
    3
    Likes Received:
    0
    I had the same problem with Edelbrock. turned out the sensors I recieved with the unit where
    wired wrong. I run ours at about 1/8" and now they are working ok.
     
    #4
    G man, May 4, 2005

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM