BAE Arias Brooks Crower Discs Floaters Valves Tools

Everything is new or in great condition.

Complete 4.250 bore piston assembly for BAE 5 Fathead (used for A/Fuel combo using 7.270” rods and 3.750” crank)
8-new 4.250” coated Arias pistons Job #411188
8-used 4.250” coated Arias pistons Job #411188 with low run rings installed
9– New wristpins 1.156”, 3.400” long, 367gram
13– used wristpins 1.156”, 3.400” long, 367gram (all .000” round-none bent)
6-used wristpins 1.156”, 3.400” long, 347gram (all .000” round, one out of round by .001”)
32- new and used wristpin buttons
12– New 4.250 Akerly & Childs .017 dykes top rings Ductile Duramoly
12– New 4.250 Akerly & Childs 1/16 2nd rings Cast Iron
14– New 4.250 Akerly & Childs Oil control rings High Tension
Would like to sell above as complete package
$1200 for all above parts



HEMI RODS
8- NEW Brooks TF (solid beam) 7.270" long, 1.156" pin
$600
4- NEW Brooks TF (solid beam) 7.280" long, 1.156" pin
$300
3- NEW Brooks TF (solid beam) 7.290" long, 1.156" pin
$225
8- NEW GRP (NOT solid beam) 6.856" long, 1.156" pin
$550

BAE 5 Fatheads
1 set- BAE 5 fatheads with studs and o-rings, great condition
$2400/set

BAE 5 Fathead Intake valves 2.425”
13– New Titanium Intake valves BAE/Victory 2.425”
$75each
18– Used Titanium Intake valves BAE/Victory 2.425” (full margins)
$40 each

BAE 5 Fathead Inconel Exhaust valves 1.950”
4– New Inconel Exhaust valves BAE 1.950”
$35 each
18– Used Inconel Exhaust valves BAE 1.950” (full margins)
$20 each

VALVE SPRINGS
20– Valve springs 350lbs-400lbs @ 2.100” height
$200

RETAINERS AND LOCKS
38– used Titanium retainers BAE Super 7deg
55 pair– new/used BAE Super 7deg intake retainer locks
33 pair– new/used BAE Super 7deg exhaust retainer locks
$500 for all


PISTON RINGS
2 sets– New 4.375” Akerly & Childs Ductile Duramoly 1/16 top ring (not dykes)
$40 per set

1-Moroso Hemi dragster 7" deep oil pan. Has steel inserts around stud holes. Good used
$350

35- wristpins new (approx. 9 new)/used. 1.094dia, 3.100" long, 220gram. All the used pins are .000 round.
$10 each

3-wristpins used. 1.094dia, 3.120" long, 241gram. All pins are .000" round
$7 each

1-Nuke fuel pump 1.300 gear with 3-way shutoff. I have Gorr flow sheet just completed
$1,000.00

2- BAE one piece aluminum 6" long gear drive front cover pump extensions (quick release flange) relieved for blower pulley clearance (for Donovan or last generation style RCD drives)
$150 each

1- BAE aluminum gear drive front cover face plate (for bolt on pump extension)
$50

1- NEW 4.5" long cast aluminum bolt on pump extension (bolts on to BAE face plate) with 6.25" long, 3/8 hex pump drive shaft
$50

CLUTCH DISCS AND FLOATERS
5– New 10.5” big stand floaters .440 thick
$40 each
24– New 10.5” floaters big stand East/West .400” thick
$40 each
23– New 10.5” Clutch discs (8 are ACE discs)
$80 each

2 each- Crower hemi 10" aluminum (2) flywheels and (2) donuts (I will pay to have recerted when sold)
$500 each set



SAFETY EQUIPMENT
Stroud firesuit SFI 3.2A/15 good until 2015 fits 5'11 195lb $500.00
Used Simpson gloves SFI 3.3/5 large blue $50.00
Used Simpson gloves SFI 3.3/1 large blue $40.00
Used Simpson shoes SFI 3.3/5 size 10.5 blue $50.00
Deist neck collar SFI 3.3 Large black $25.00
Used head sock Simpson SFI 3.3 $20.00
Helmet Simpson Voyager SA2000 plus spare lenses $200.00


TOOLS

Piston/rod rack (same one that www.goodvibesracing.com sells part #T-3003) great condition
$100

Fowler 6" deep throat 0-1" micrometer (for clutch discs), locking thimble, adjustment wrench and case
$75.00

Starret depth mic set 0-6"depths, 4" wide base
$150.00

contact for pictures or additional info.

Brad Hansen
360-393-7969 cell/text
bradhansen6879@gmail.com

 

bump to the top

 

INterested in firesuit. Still have it? Will it recert?

 

bump to top

 

brad dou still hav clutch
guy
g.Kelly@kellytrucking.com

 

bump to top