521 BAE 6 Motor intake to pan $24,500. New crank, rods, pistons, lifters & more!

Discussion in 'Noonan Classifieds' started by Will Hanna, Sep 28, 2015.

  1. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    133
    521 BAE 6 Motor intake to pan with new rotating assembly FOR SALE.

    This motor will have new Winberg 4.150 Crank with new rods/pistons. Rod/Piston combo will be to your specs.

    Includes:

    - .100 Tall Billet BAE Block. 1 window job done at BAE. No saddles. 4.4675 bore. Sleeves checked good, fresh hone job on block and line hone.
    - NEW Winberg 4.15 Crank, double keyway (upgrade to splined optional)
    - NEW GRP Rods with pro material and L-19 bolts (length to fit your spec)
    - NEW CP Pistons built to your spec
    - NEW Ring package
    - NEW 1.094 taper wall wrist pins
    - NEW buttons
    - NEW main/rod bearings
    - NEW Morel .904 lifters
    - NEW Williams billet rail oil pan (dry or wet sump)
    - BAE 6 heads complete with Victory Titanium Valves and NEW valve springs, locks and retainers to suit your application
    - BAE Mag Intake for .100 tall (short version) - repaired at BAE
    - RCD Billet front cover, fuel pump extension and cam drive
    - Crane 54 mm cam (can upgrade to custom grind for your application)
    - RCD Titanium hub with degree wheel
    - RCD Crank trigger & TDC bracket
    - P&P Dry Sump Oil pump
    - Assembled by Hanna Motorsport Services

    I can build this motor to your specs or assist with recommendations for your application. This motor is a very nice piece that will have a lot of new parts. This could make a good Top Alcohol, Pro Mod or Top Dragster/Top Sportsman motor. Whoever buys this motor will be getting a very nice piece!

    Can assist with fuel system, baseline tune up and track side service if desired.

    I have a set of Total Flow 5 heads I can offer this motor with at a discount if desired. I can also do any number of upgrades to camshaft and later model heads to make this a front of the pack competitive heads up motor.

    $24,500 assembled, ready to pick up or ship from Baytown, Texas.

    I am going to offer this package for a few weeks (with new rotating assembly). If I don't get any bites, I'm just going to part the block, heads and components I have out as-is. So if you are interested in this package, let me know.

    Will Hanna
    Hanna Motorsport Services
    979.415.4959
    will.hanna@insidetopalcohol.com
     
    #1
    Will Hanna, Sep 28, 2015
  2. BEDNAR1320

    BEDNAR1320 Member

    Joined:
    Oct 8, 2008
    Messages:
    323
    Likes Received:
    21
    Will, what's the cost with the TF5 heads?
     
    #2
    BEDNAR1320, Sep 30, 2015
  3. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    133
    Tf5

    I would $23,000 with new valves in the Total Flow 5 heads.
     
    #3
    Will Hanna, Oct 1, 2015
  4. PITMATUSA

    PITMATUSA Member

    Joined:
    May 30, 2010
    Messages:
    62
    Likes Received:
    1
    Bae engine



    will, what do you need for the engine not assembled ?
     
    #4
    PITMATUSA, Oct 6, 2015
  5. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    133
    assembly

    If someone wants to assemble this themselves, I will knock $850 off the price.
     
    #5
    Will Hanna, Oct 7, 2015

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM