Straight Mag drive fitment question.

Discussion in 'PSI Superchargers Tech Questions' started by boostedgt500, Aug 20, 2015.

  1. boostedgt500

    boostedgt500 Member

    Joined:
    Mar 30, 2015
    Messages:
    149
    Likes Received:
    2
    On a Bae block and set of 8x heads I'm looking at using a straight mag drive and plan on gutting the inside of the drive and installing a cam sensor inside it. Will the straight drive work with fatheads? I have to drive the oil pump anyways so I'd like to use a nice heavy duty drive for what I'm doing. I'd rather not use an offset drive if I don't need to.
    I'm thinking the mag is what hits the head so that is why an offset is needed, but there will only be a cover on the drive when I'm done. Hopefully someone here understands what I'm trying to accomplish and help me out.


    This is what I'm looking at.
    http://www.rbssuperchargers.com/Pro...Single_Mag_Drive_Fuel__Veney_Heads--7010-0003
     
    #1
    Last edited: Aug 20, 2015
    boostedgt500, Aug 20, 2015
  2. Swedpuller

    Swedpuller New Member

    Joined:
    Nov 17, 2014
    Messages:
    14
    Likes Received:
    0
    Hi!
    Yes, that will work for you, you are right Its the mag that hits the head not the magbase !
     
    #2
    Swedpuller, Aug 21, 2015
  3. aj481x

    aj481x Member

    Joined:
    Jan 27, 2004
    Messages:
    976
    Likes Received:
    18
    This may not help but Leahy now has a cam sync for a mag drive.
     
    #3
    aj481x, Aug 21, 2015
  4. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    That all depends if you are a door car with a front or an open car. The straight drive is a problem with a door car or FC because it sticks up too high. A dragster will have no problem
     
    #4
    Mike Canter, Aug 21, 2015
  5. boostedgt500

    boostedgt500 Member

    Joined:
    Mar 30, 2015
    Messages:
    149
    Likes Received:
    2
    Is that the Electromotion website?
     
    #5
    Last edited: Aug 27, 2015
    boostedgt500, Aug 27, 2015
  6. boostedgt500

    boostedgt500 Member

    Joined:
    Mar 30, 2015
    Messages:
    149
    Likes Received:
    2
    Thank you.
     
    #6
    boostedgt500, Aug 27, 2015
  7. aj481x

    aj481x Member

    Joined:
    Jan 27, 2004
    Messages:
    976
    Likes Received:
    18
    Yes ...........
     
    #7
    aj481x, Aug 28, 2015

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM