Help identifying cam core/manufacturer

Discussion in 'PSI Superchargers Tech Questions' started by Paul Langlie, Jul 14, 2015.

  1. Paul Langlie

    Paul Langlie New Member

    Joined:
    Apr 5, 2010
    Messages:
    5
    Likes Received:
    0
    Just pulled down our engine (Hemi) and need to see if anyone can help us find out who manufactured/ground the camshaft. It is a 60mm core and it has the stamping Y353 on the end. No other identifiers or markings.

    The engine work was supposedly performed by Oddy's and run in NHRA Pro Mod during the 2008 season. Thanks in advance for any information you might have.

    Paul Langlie
     
    #1
    Paul Langlie, Jul 14, 2015
  2. Paul Langlie

    Paul Langlie New Member

    Joined:
    Apr 5, 2010
    Messages:
    5
    Likes Received:
    0
    Anyone?

    Who are the major players in the Blown Hemi camshaft world, I can try and call around? I figured Oddy might use a specific mfg. like Bullet or ???

    Paul
     
    #2
    Paul Langlie, Jul 15, 2015
  3. aj481x

    aj481x Member

    Joined:
    Jan 27, 2004
    Messages:
    976
    Likes Received:
    18
    That may just be the number for the core. Doesn't sound like common grind or part number.
     
    #3
    aj481x, Jul 15, 2015
  4. cknight

    cknight Member

    Joined:
    Apr 2, 2008
    Messages:
    63
    Likes Received:
    6
    Not Crane markings. Anything marked on the front or on the area next to the distributor gear? Jim Oddy used lots of Isky cams. Regards, Chase
     
    #4
    cknight, Jul 15, 2015
  5. Paul Langlie

    Paul Langlie New Member

    Joined:
    Apr 5, 2010
    Messages:
    5
    Likes Received:
    0
    Yes, I believe that it is just a core number. There is no other distinguishable number on the cam. We will have to Cam Dr. it for exact specs. I guess.

    Paul
     
    #5
    Paul Langlie, Jul 15, 2015

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM