F/C Handbrake

Discussion in 'PSI Superchargers Tech Questions' started by altered boy, Mar 26, 2014.

  1. altered boy

    altered boy Outlaw Altered

    Joined:
    Aug 4, 2003
    Messages:
    418
    Likes Received:
    3
    working on moving some controls... and mounting the handbrake. was wondering what most are using for the center to center dimension on the brake lever from the pivot to the master cylinder rod attachment? right hand brake standard style lever pull application. running front/rear strange steel brakes on a 10.1E nostalgia fuel car

    any input appreciated. thanks... sean
     
    #1
    altered boy, Mar 26, 2014
  2. OwnBlock

    OwnBlock Member

    Joined:
    Jun 12, 2006
    Messages:
    238
    Likes Received:
    3
    distance

    7 : 1 ratio works real good
     
    #2
    OwnBlock, Mar 26, 2014
  3. Bill Naves

    Bill Naves Member

    Joined:
    Jun 25, 2003
    Messages:
    594
    Likes Received:
    0
    mckiinney handle

    Brake Handle - F/C Pull
    Click here for More Info

    This brake handle is used in F/C Pull Applications. The typical McKinney Master Cylinder location is behind the brake handle. This is a bottom pivot brake handle with a ratio of 9.7:1 which gives a brake pressure of 1653 lbs. Brake pressure is calculated with a 3/4" Bore Master Cylinder and a Push/Pull force of 75 lbs.
    List Price: $92.50 per EACH
    Qty: Buy this item
    Add to Wish List
     
    #3
    Bill Naves, Mar 27, 2014

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM