3 to 2 speed lenco

Discussion in 'PSI Superchargers Tech Questions' started by harrisracing, Jan 11, 2014.

  1. harrisracing

    harrisracing Member

    Joined:
    Nov 15, 2004
    Messages:
    116
    Likes Received:
    1
    I know that I have seen this before but I would like to make my 3 speed a 2 speed and keep all the sections so I can have my options open. Thanks Randy:confused:
     
    #1
    harrisracing, Jan 11, 2014
  2. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    Call Lenco and get a dummy shaft for the front section. Then pull out the front Gearset and replace it with the dummy shaft. You also need a plug for the shift tower hole. You still need to put oil in that front section because of the bearings.
     
    #2
    Last edited: Jan 12, 2014
    Mike Canter, Jan 12, 2014
  3. jeffj

    jeffj Member

    Joined:
    Mar 8, 2008
    Messages:
    225
    Likes Received:
    12
    Call Hugh at 604-794-5735. He has a couple of the Lenco gear set eliminators. It is a little piece that takes a bearing and goes into the case where the ring gear was. Your current shaft just plugs in to it. If you leave the tower in place it will be sealed up. Mike is correct that you need oil in that unit for the bearings and I think you need to add a bit more oil to get back to the same level as the clutch pack is no longer there to displace some of the oil.
    Jeff Johnsen
     
    #3
    jeffj, Jan 12, 2014
  4. Larry Reep

    Larry Reep New Member

    Joined:
    Jul 11, 2003
    Messages:
    44
    Likes Received:
    0
    gear set eliminator

    I have gear set eliminator for sale
    Larry Reep
    512-9282240
     
    #4
    Larry Reep, Jan 13, 2014
  5. rb0804

    rb0804 Active Member

    Joined:
    Aug 7, 2010
    Messages:
    671
    Likes Received:
    38
    I got mine from Holbrook
     
    #5
    rb0804, Jan 13, 2014

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM