Setback on B1 heads

Hello All,

I did a custom 1" thick setback plate for my K8 non Superman w/ pie oultet compressor.
Here is a picure of the mock up :



Do you see any fuel distribution issue with that much setback +/- 5", the outlet pie is pretty much centered in the manifold now.

What / where may I find a blower snout to fit on ? ( I may need a 10" long snout)

cheers,

Eric

eric@vantastic-racing.com

 

We did the same on 18 degree sbc and it works perfect. The front two cylinders will still be a little leaner but overall the nozzles are within a couple.

 

http://www.rbssuperchargers.com/Snouts.cfm?sc1=15

 

setback

Try just turning the manifold around. It will gain you 3 5/8" setback.I have run one that way and it helped me.

 

What manifold did you use. We just finished our 18 degree using a carb manifold we modified for our blower app moving the blower back 3 1/2.

 

Here is what it looks like from above, you can see the pie opening centered in the intake.



any opinion ?