PSI Manifold Temp

Discussion in 'PSI Superchargers Tech Questions' started by doug_ta, Jan 25, 2012.

  1. doug_ta

    doug_ta Member

    Joined:
    Nov 19, 2004
    Messages:
    78
    Likes Received:
    0
    Hi,

    Is there a reason that increasing the hat nozzle area significantly doesn't decrease the manifold temp at all? I am running a PSI "D" Blower at 92% o/d.

    Thanks
     
    #1
    doug_ta, Jan 25, 2012
  2. JM

    JM Member

    Joined:
    Aug 17, 2005
    Messages:
    188
    Likes Received:
    0
    Manifold temp

    Location of the probe?
     
    #2
    JM, Jan 27, 2012
  3. doug_ta

    doug_ta Member

    Joined:
    Nov 19, 2004
    Messages:
    78
    Likes Received:
    0
    In the manifold, under the discharge port of the blower.
     
    #3
    doug_ta, Jan 27, 2012
  4. jody stroud

    jody stroud ZOMBIE Top Dragster

    Joined:
    Sep 3, 2007
    Messages:
    854
    Likes Received:
    15
    what is your current temp?
     
    #4
    jody stroud, Jan 28, 2012
  5. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    133
    nozzle size

    A -3 line will not flow much more than a 75 jet, so if you are trying to use big nozzles (80-90), you are not doing much. So if you already have 4 75's, you may need to add an additional 2 lines.
     
    #5
    Will Hanna, Jan 28, 2012
  6. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    Will, what is the inside diameter of an A-3 hose? Is it 3/16"?
     
    #6
    Mike Canter, Jan 28, 2012

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM