need advice on a hemi combination

Discussion in 'PSI Superchargers Tech Questions' started by hines, Oct 25, 2011.

  1. hines

    hines Member

    Joined:
    Jun 9, 2007
    Messages:
    156
    Likes Received:
    0
    Looking at switching from a blown wedge to a hemi for next year. Got a chance to get a good set of Brad 6 heads and manifold for cheap. What is a good reliable short block conbination that wont break the bank. Will have a Mike Janis worked 14-71 in a 2700 lb car. Want to go 6 teens in the quarter.
     
    #1
    hines, Oct 25, 2011
  2. moparchris440

    moparchris440 Member

    Joined:
    Jun 8, 2008
    Messages:
    370
    Likes Received:
    0
    6 teens at 2700 lbs your gonna need 2600 hp plus.
     
    #2
    moparchris440, Oct 25, 2011
  3. jay70cuda

    jay70cuda Well-Known Member

    Joined:
    Sep 30, 2009
    Messages:
    1,139
    Likes Received:
    35
    We ran 6.25@228 with only 2375 hp on the dyno at 2730 after run. Stick with stock brad pistons , block Grp or rnr rods and keep the rpms away from 10000. If you stick with stuff that's on the shelf . It makes for more reliable outcome without breaking the bank
     
    #3
    jay70cuda, Oct 26, 2011

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM