puke tank drawings?

Anyone have a puke tank drawing so i can get one mage from carbon fibre please?

RULES STATE THIS...

Minimum catch can(s) capacity is a four-quart (3.78 liter) sump (i.e., below the bottom baffle) when the valve cover discharges are routed through the upper framerails; otherwise an eight-quart sump (7.57 liter) capacity is required.
Catch cans must have adequate internal baffling. Minimum catch can inlet and outlet/discharge configuration is two 1 1/8-inch (28.6 mm) inside diameter openings (or equivalent area). Vent tubes must be unobstructed from the interior of the valve cover to the interior of the catch can; i.e., no orifices, reduced areas, filler materials, etc. See General Regulations 1.13.

Thanks

 

send me an e-mail....i will send you a drawing of the one i made.......works great for us
Darren

 

Thanks, email sent.

 

would you mind sending a drawing also of your puke tank....e-mail is hotrodharley@wirelessbeehive.com

thanks

 

sent Don....any questions please let me know
Darren