Fabricated fat head valve covers

Discussion in 'PSI Superchargers Tech Questions' started by G Martin, Jul 14, 2011.

  1. G Martin

    G Martin Member

    Joined:
    Aug 15, 2005
    Messages:
    67
    Likes Received:
    1
    Who is the best source for fabricated aluminum valve covers for fat heads?

    Thanks

    Greg
     
    #1
    G Martin, Jul 14, 2011
  2. 310TAD

    310TAD Top Alcohol

    Joined:
    May 11, 2003
    Messages:
    919
    Likes Received:
    9
    valve covers

    Call Mick Snyder @ (219) 987-2921

    Good luck,
    Marty
     
    #2
    310TAD, Jul 14, 2011
  3. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    133
    Mickey Williams

    Mickey Williams of Williams Performance makes a great cover. You can have spring oilers built in or not.

    Manton sells those covers. Call them at 951.245.6565
     
    #3
    Will Hanna, Jul 14, 2011
  4. noelmanton

    noelmanton Authorized Merchant

    Joined:
    Mar 13, 2007
    Messages:
    162
    Likes Received:
    1
    Valve Covers

    We always keep 5 to 10 sets in stock.

    VALVE COVER~2.JPG VALVE COVER~1.JPG

    MANTON ROCKERARM

    951 674-2212
    951 245-6565
     
    #4
    Last edited: Jul 14, 2011
    noelmanton, Jul 14, 2011
  5. AFC357

    AFC357 New Member

    Joined:
    Nov 19, 2007
    Messages:
    986
    Likes Received:
    0
    Williams stuff is GREAT, oil pans are the best Ive used also, cost less than Uncle Larrys stuff too (sorry) but it is what it is
     
    #5
    AFC357, Jul 14, 2011
  6. G Martin

    G Martin Member

    Joined:
    Aug 15, 2005
    Messages:
    67
    Likes Received:
    1
    Guys,

    Thanks for the info.
     
    #6
    G Martin, Jul 14, 2011
  7. underby6

    underby6 Active Member

    Joined:
    Sep 28, 2006
    Messages:
    1,189
    Likes Received:
    0
    Williams makes a very nice set of covers, the plug tubes are welded in which is a big plus over some other brands. I think overall the best cover is the one DMPE makes, it's billet and not cheap but the finished products is amazing.

    Brandon Booher
    NHRA TAD #34
     
    #7
    underby6, Jul 14, 2011
  8. secondwindracing

    secondwindracing top alcohol

    Joined:
    Feb 10, 2004
    Messages:
    2,894
    Likes Received:
    7
    Brandon, your car looked good in national dragster....Dave
     
    #8
    secondwindracing, Jul 14, 2011
  9. tom pickett

    tom pickett Super Comp/tad

    Joined:
    Aug 21, 2003
    Messages:
    128
    Likes Received:
    0
    moroso is making a nice cover.fit and finish excellent.any questions contact my son jon
    tom pickett
     
    #9
    tom pickett, Jul 14, 2011
  10. James2

    James2 Member

    Joined:
    Apr 15, 2004
    Messages:
    59
    Likes Received:
    6
    Noel - does williams make a similar cover for duel plug fuel heads?
    Brandon - I don't see the plug tubes welded in? Or is that an option?
     
    #10
    James2, Jul 17, 2011
  11. underby6

    underby6 Active Member

    Joined:
    Sep 28, 2006
    Messages:
    1,189
    Likes Received:
    0
    I didn't mean the actual tubes, the receivers for the tubes. On some of the other covers; the receiver is threaded down through the top of the cover and there is a jam nut on the underside. I run the larger breather, 1.75, so Williams had me send them one and they made me a "one-off" set to work with my breather for not a penny more. They also use a special type of rod when welding, this really shows in the anodizing (and is the reason why they use said rod). They are a great cover, just don't overtighten them otherwise they'll bend.

    Brandon Booher
    NHRA TAD #34
     
    #11
    underby6, Jul 17, 2011

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM