Vavle Spring Compressors

Hello Everyone
Anybody know of good valve spring compressor to use on these 300# springs used in TA/FC now days?
Or are you taking big C Clamp and making spring retainer holder on end?
My old AIR one will not bug these bad boys.

 

valve spring tool

Hi al at manton racing prod
we have a tool to check spring press
and to remove the spring on or off the car
verry simple !
The tool is the nice and easy to use!
Call or e mail me
951-245-6565 or
al@mantonpushrods.com

 

Their is a long thread on here about spring clamps I have an MTI but when it won't get the job done I drag out the home built c-clamp. One hint get a 1/2 female to 3/4 male socket adapter drill out the male end then weld it or bolt to the screw in the c-clamp Now you can use your 1/2 drive impact for an air powered c-clamp.

 

made mine out of a C clamp i tried several air ones no luck

 

Spring Compressor

Look at mantonrockerarms.com Page 5.
The safest, fastest. and most practical you can buy. Made in Sweden by the Leanders Brothers.

Ask Norm Grimes, Brad Personet, Bill Moore.

They are not cheep. But very cost effective.

And work on or off the engine.

We have this item in stock. call Al at Manton Racing Products. 951 245-6565.


Noel Manton
www.mantonrockerarms.com

 

Thanks Guys for input.

Al That tool is plain bitchen!
THX for sharing

 

Spring tool

if you need any other info let me know

 

I use an MTI air with up to 500# installed pressure with no problems. Something is wrong.