question-wiring the transbrake-2 step and leahy timer to work

I want to wire my trans brake button and 2step together so of course they work when I hit the button. (blown alky)

But The leahy timer (green wire)( lencodrive) deal is suppossed to be wired so when I hit the trans brake button it will turn off and when the button is released it will activate all the timers. Any help on the simple way to achieve this? Does that mean it sees ground? Do I need to use relays?

Thanks

 

Green wire

did you buy this box new? You need to know the Configurations of the green wire he will do it 3 ways, Apply 12v to Green wire to start the timer. Remove 12v from Green wire to start the timer. or Remove 12v from Green wire to start the timer. Re-Apply 12v to Green wire to reset the timer the ones I have wired are the last but you need to know befor you wire it up

 

timer

The way I understand it is that when the trans brake button is pushed it will take 12 volts away from the timer and when released it will start its sequence again.

 

Go to www.electrimotion.com and click on "instruction sheets". On the right hand side there are all the wiring diagrams for the various models and setups.

Brandon Booher
NHRA TAD #34