Hemi Intake Manifold sealing???

This is my first set of hemi heads with O-rings, I have always just used intake gaskets and the foam ends. What I am concerned about is between the O-rings up the sides of the intake, do most use a sealer between the O-rings to keep oil windage/blowby from blowing out the sides just with the foam gaskets on the ends, any help would be appreciated! THANKS! Jim

 

O-rings

No just use some white grease on the O-rings so when you take off the intake it doesn't want to pull the rubber apart. You own a hemi now. Forget about everything else. Don

 

Don, THANKS for your help!

Don, THANKS for your help, all of the viewers, either did not know or had another opinion! THANKS! Jim