Coupler question...

Can the male coupler on the back of my powerglide be connected directly into the female coupler on the pinion, or does there have to be a shaft between them?

I'm considering a combo for my wife that is too long for the chassis unless I can go straight from the tranny to the pinion.

Thanks,

-Brian

 

Coupler

Ran mine that way for years no Problem. Just make sure everything aligns true.

 

yes Brian you can do that but make sure you have some play back and forth around 1/4 in....Dave

 

Not a problem , its very common in comp dragsters

 

Yahooooo. I couldn't see any reason that it wouldn't work, but I thought I'd better ask.

Thanks guys,

-Brian

 

If you need to purchase one check with maker like Strange because if you have 4" or so between trans and rear end,They make a guick disconnect coupler that will allow removal of trans. with out moving motor and makes life alot easier.

 

couplers

Check Strange & M W sites. Measure from the front of coupler on rear, and rear seal on the trans. Those quick disconnection's are only in 27 spline. so if you have a 32 spline stuff ii is different you will need to do something else.. But it can be done. I have 71/4 in and 32 spline stuff, and I still have a quick disconnect Don