Bruno Air Line Size

Can you use 1/4" tubing for the Bruno transbrake line or is 3/8" line required for this? This is the 200LBS line. Thanks.

Tom

 

I've been using the 1/4" for two years, no problems.

 

tom, I ran braided to it, it is set up for -4 AN I believe I think 1/4 tube is a bit small

 

line

4an is1/4in.

 

I might be wrong,but that tube is 1/4 od. I use it for my air pods, last time I looked, it has a pretty small id. it may be OK. but I feel better with a AN connection, the -4 was already on mine when I got it from Bruno.... just my opinion!!!!!!!!

 

line

Got 5 nickles does it equal a quarter it is sized by O.D. You can have !/4 with a.00001 hole but it is still #4 od

 

The 1/4 line is more than adequate to activate the transbrake piston, it has no effect on transbrake release, that is solely controlled by the air-dump solenoid.

 

I understand what your saying, I was trying to distinguish between -4 AN and 1/4 nylon tubing , they are not the same, ( I'm not trying to argue with you)