off set bbc mag drive

anybody make a bbc off set mag drive for a light weight msd pro mag 12 ?

 

These are the only two I know of http://www.goodvibesracing.com/magneto_offset_drives.htm
I run the dunn, it's not a very stout piece. It needs a spacer between the manifold and the bolt hole in it, this is a must or when you tighten it it will bend it and all sorts of bad sh.t will happen( it all falls apart ). I pinned the press on 5mm sewing machine belt drive wheels so they wouldn't slip. It works prety good now though. PSI was working on one years ago but I don't think it ever came to be.



Marty

 

Lots of options

Do you mean an offset to run the mag in the standard BBC location (back of block), a unit to run it up front off the gear drive (like a Hemi), or a front drive to run the mag and pump straight off the cam?

Fuel Injection Ent sells a very nice and very affordable unit to drive the mag and pump straight off the cam: http://fuelinjectionent.com/webstore/product_info.php?products_id=190

RCD (download the catalog here: http://www.rcdengineering.com/catalog/request_catalog) makes 2 types of front drives, one that runs off the gear drive (so the mag is vertical like a Hemi) or a dual drive to run it off the cam, straight out from the block.
http://www.rcdengineering.com/search/drives-parts/magneto-drives?view=2&cat=3018

If you're looking for a total custom built piece, Leonard Hain builds both rear drive and front drive units: http://www.haincompany.com/?racing

Mike Dunn in TX also builds rear and front drive units, he doesn't have a web site but you can search the archives for his phone number, i'm sure someone posted it here before.


Hope that helps
Chris

 

My grandfather, George Sitko, also makes very nice drives.

He's in Norwalk California, give him a call - 562-243-0482.