Rear End Oil

Discussion in 'PSI Superchargers Tech Questions' started by SCO1035, Jan 14, 2011.

  1. SCO1035

    SCO1035 New Member

    Joined:
    Dec 2, 2007
    Messages:
    155
    Likes Received:
    1
    Can someone tell me the correct amount of gear oil for a MW 9" modular rear?
    Thanks in advance.

    Damien.
     
    #1
  2. john348

    john348 Top Alcohol

    Joined:
    May 29, 2003
    Messages:
    1,348
    Likes Received:
    5
    1 gallon is what i was told
     
    #2
  3. M Tigges

    M Tigges TAFC

    Joined:
    Jun 11, 2003
    Messages:
    644
    Likes Received:
    1
    gear oil

    We use 6 in ours
     
    #3
  4. blown375

    blown375 New Member

    Joined:
    Sep 9, 2005
    Messages:
    733
    Likes Received:
    0
    Is there no plug in the side of the center section ?
     
    #4
  5. spitzerscott

    spitzerscott Member

    Joined:
    Nov 20, 2009
    Messages:
    62
    Likes Received:
    0
    I checked mine, it has a plug in the side of the third member.
     
    #5
  6. SCO1035

    SCO1035 New Member

    Joined:
    Dec 2, 2007
    Messages:
    155
    Likes Received:
    1
    No there isn't a plug in the side of the centre section, only 3 bolts, two upper and one lower on the front of the case, which I'm tipping are holding the spool etc in place.
    Not much on the MW website that I could find, either.
     
    #6
  7. Kramer Metal Fab Inc.

    Joined:
    Jul 28, 2008
    Messages:
    213
    Likes Received:
    6
    Floater Lube

    MW website Technical tab Service bulletins. Service Bulletin 0038 Thirdmembers
    Lots of good info there if you own MW products. Rusty Kramer
     
    #7
  8. john348

    john348 Top Alcohol

    Joined:
    May 29, 2003
    Messages:
    1,348
    Likes Received:
    5
    from MW site

    OIL REQUIREMENTS :
    STOCK FORD HOUSING REQUIRES A MINIMUM OF 3 QUARTS OF GEAR LUBE. A FABRICATED OR M/W MODULAR HOUSING MINIMUM AMOUNT SHOULD
    BE 4 QUARTS OF GEAR LUBE. M/W ALSO RECOMMENDS THAT WITH ANY HOUSING THE USER MUST TAKE INTO CONSIDERATION THE CONFIGURATION
    OF THE HOUSING AND G-FORCES THAT WILL DISPLACE LUBRICATION, ADJUST THE GEAR LUBE LEVEL SO PROPER LUBRICATION IS OBTAINED.
     
    #8
  9. SCO1035

    SCO1035 New Member

    Joined:
    Dec 2, 2007
    Messages:
    155
    Likes Received:
    1
    Thanks guys.
    I need to look a bit harder next time!
     
    #9

Share This Page