Newbie Questions About Hemi.........

Hi,
Here's a couple of (dumb) questions:

When installing a single enderle mag drive and a P&P pump, what is the set-up procedure? Any clearances that are critical? Pitfalls to watch out for?

What is the best method to plumb external oil lines to the heads (Veney)?

Can you "pre oil" a hemi......likeusing a drill to pre oil a BBC?

Thanks!!
Mike Little

 

Hemi

External lines for Veney, I tapped into the oil filter mount and brought a -6 to a blkc with 4 -3 lines to the heads. Preoiling, just spin it over til you have pressure. Make sure and prelube the pushrod balls with some type of assy lube before firing for the first time every day. i use techline on my pushrods but have used lucas oil additive in a pinch.

 

Thanks Danny!
I appreciate the info.

Regarding the mag drive:
Do I just stick the mag drive in and adjust the collar to that height....or is there a certain amount of clearance that needs to be set?

Mike Little

 

clearance

yes, but I honestly, don't recall how much, someone else can chime in?