92 TFX onboard mini-starter mounting?

Does anyone make a kit to machine/redo the starter area to mount an onboard mini-starter? I need to mount an on board starter due to rules and would appreciate any help or advice! THANKS!

 

Mini Starter

Call Art at Coan Engineering, he should have a kit to do that,,

 

I got mine from Tim McCammis. Very nice people to work with. The piece i got from them bolts through my mid plate to the clutch can.

 

i made ours myself about 10 years ago. we run a TFX 92 in our car as well. i can walk you through it, or you can send me your motorplate and i will be happy to fix you up. here is a pic. our car is pretty narrow, but we got it in there. ours bolts to the motorplate on the oil pump side. give me a call anytime after 4pm est.
Darren Russell
937-776-7542

 

THANKS for the HELP!

THANKS to all who replied, all very helpful info for mounting the motor this winter! I am going to try and mount to the motorplate, THANKS again for your help! THANKS! Blown540

 

starter

we milled rear edge of block flat next to edge of oil pan.than mounted flywheel,than drilled block and mounted chev starter to block worked for a hydro weighted less than a rcd starter we also made our own flywheel too used a old schafer flywheel and mounted a chev ring gear to it