Mallory magneto rotating after each pass

Discussion in 'PSI Superchargers Tech Questions' started by alkynova, Jun 23, 2010.

  1. alkynova

    alkynova New Member

    Joined:
    Jan 10, 2009
    Messages:
    35
    Likes Received:
    0
    Is it commont for a mallory 5 amp magneto to rotate after one pass? only spun around 8000 rpm. SBC. I'm using a stainless steel band to hold it to my offset drive. Any suggestions:confused:
     
    #1
    alkynova, Jun 23, 2010
  2. Comax Racing

    Comax Racing Member

    Joined:
    Sep 20, 2006
    Messages:
    673
    Likes Received:
    7
    Mallory Mag

    My Mallory mag has never moved and I use an old POS band clamp that I should really replace. Can you turn it by hand after you tighten everything up? What type of offset drive are you running?

    Corey
     
    #2
    Comax Racing, Jun 23, 2010
  3. RACEFACE

    RACEFACE Member

    Joined:
    Oct 27, 2006
    Messages:
    73
    Likes Received:
    0
    Clamp

    Throw that band clamp as far as you can. Get a billet clamp from dunn (940-240-1603) before it cost you a engine.
     
    #3
    RACEFACE, Jun 23, 2010
  4. Comax Racing

    Comax Racing Member

    Joined:
    Sep 20, 2006
    Messages:
    673
    Likes Received:
    7
    Mallory Mag

    I do agree with the billet clamps they are the way to go. Sitko makes a nice on also.


    Corey
     
    #4
    Comax Racing, Jun 23, 2010
  5. suddendebt

    suddendebt Blown Altered

    Joined:
    Aug 16, 2009
    Messages:
    133
    Likes Received:
    0
    Does Dunn or Sitko have website.

    If not how about some contact info please

    Thanks Bob
     
    #5
    suddendebt, Jun 23, 2010
  6. Comax Racing

    Comax Racing Member

    Joined:
    Sep 20, 2006
    Messages:
    673
    Likes Received:
    7
    Mag Clamp

    Good Vibrations has a picture of the Dunn clamp.

    Go to dragparts.com and look under magneto accessories.

    Corey
     
    #6
    Comax Racing, Jun 23, 2010
  7. DQUES

    DQUES Member

    Joined:
    May 20, 2004
    Messages:
    650
    Likes Received:
    6
    Try Robert Reehl , I think he sells a billet clamp at a reasonable price and is a sponsor on this site .
     
    #7
    DQUES, Jun 23, 2010
  8. SoDak

    SoDak Active Member

    Joined:
    Dec 29, 2006
    Messages:
    1,524
    Likes Received:
    3
    We've had problems with our mallory turning and it ended being the offset wasn't machined quite right.
     
    #8
    SoDak, Jun 24, 2010

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM