Bruno venting

Anyone had any trouble w/ their bruno drive venting? It was about 1/2 quart overfull. During the burnout tires stopped spinning and the engine rpm was still high, like it was blowing through the converter, or had no converter charge. Shortly after that happened fluid spilled out of our bruno vent can and we were shut down.

Josh

 

bruno

Doesn't sound good...The harder/hotter they run the more they seem to puke.We removed the poppet on the return to the pan per Marty and it seems worse. Our new pan has the vent plumbed into it. We haven't run it yet but it doesn;t really seem like a vent.

 

I think we did remove that poppet...we just have a 90 AN fitting now. Pulled the Bruno out lastnight. Pump was blown up. Hence why it started blowing through the converter and venting all the fluid on the burnout. We think it might've been caused by electrolysis (sp?). The bruno case has multiple pits behind the pump plate in the aluminum. Not sure if it's savable....I left Bruno a message to find out how much for a case. By the way, the band is an ford AOD low/rev band.

 

from what I have seen don't remove the poppet

 

our bruno will pukle at 1/2 gt over full we have been 2 yr to sort out many problems with this unit we may be o/k now