Main Bearings

I am needing some new main bearings for my KB hemi - The part no. is MS1795-20. I'm being told that the .020 oversized bearings are no longer being made. I would apprieciate any ideas. I would prefer the V bearing but will use the M if that is all i can get.

Thanks
Dan

 

TRY ROGER WAY 704-664-7554 good luck howard

 

THE V BEARING WAS NEVER MADE IN A .020, SO YOU CAN COUNT THAT ONE OUT. THEY DID MAKE A .020 IN THE M BEARING, BUT THAT IS NO LONGER PRODUCED. SO YOUR CHOICES ARE TO POSSIBLY FIND SOMEONE WITH SOME MS1795M.020s ON THE SHELF OR GET YOU A NEW CRANK. THEY DO MAKE THE V BEARING IN 10s NOW FOR FUTURE REFERENCE.

 

Does anyone make an oversize saddle?

 

mains

Try King bearings. I think Good Vibrations sell them. But you may be out of luck there also. New Crank Don

 

no 20 bearing

we just damaged one past .10 clean up .we are having it chromed back to standard better make sure there is no cracks first.probably for less than $500 one rear main only.