what converter

building a 540bbc blown alcohol engine
11.8 static comp.
731/726 lift roller //114 lobe center //running dur 322--326//dur at .050 284--288
brodix heads flowed to 372cfm on intake at 700 lift
12-71 blower 20%OD
big&ugly injector hat
port nozzles
110 pump

trans;;pg with brake
1;80 straight cut gears
10 disc high gear

4;30 gears
car estimated at 2800 lbs
32x14.5x15 slicks

can you tell me size and stall converter i'd need for my car..funds tight so may need to buy used instead of having one built for me.

 

9" Coan Weld-Together; should be some for sale used...I think I have one as well for sale. What size shaft, TH400?

Brandon Booher
NHRA TAD #35

 

pg trans with turbo shaft..can't buy one right now still got to get money together to get my fuel system flowed but it starting to watm up here so my paint jobs will start back up and once i start painting again i'll know what to look for and buy then.what stall and price range i'm i going to be looking at.

 

For what its worth I had really good luck with BTE's spragless 9in blower convertor. They aren't cheap but they are alot less than most big names. We went .985 60's with it in very similar combo.

 

converter

pm sent to you