port injection hoses

is there anyone that is running a bbc with port injection with there fuel block mounted on rear of injector hat that could send me pics of it[hoses manily]and tell me how long there hoses are..i'm wanting to build my own lines using -3 stainlless teflon lined hoses but have no way of knowing how much hose i need to buy..also have found some very good prices on premade hoses but need to know what lengths i would need.
thanks
don
badtoyzz racing
spring creek nv.
775-738-3964
hotrodharley@citlink.net

 

Curious why you're puting it up there, won't you have 8 more lines to disconnect everytime the blower comes off?

 

NO REASON JUST LOOK LIKE A GOOD SPOT BUT DIDN'T THINK ABOUT BLOWER REMOVAL..GOOD POINT.WON'T BE RACING FULL TIME JUST PLAYING BUT STILL WANT THINGS NICE/CLEAN/EASY TO WORK ON..WAS WANTING TO USE THE STAINLESS HARD LINE KIT THAT GOOD VIBRATIONS SELLS BUT IT PUTS THE DIST. BLOCK DIRECTLY IN FRONT OF BURST PANEL AND THAT LOOKS UNSAFE TO ME HAVE FUEL IN FRONT OF BURST PANEL TO BREAK OFF IF BURST PANNEL BURST.WHERE DOES EVERYONE MOUNT AND ROUT THERE SYSTEMS?PICS GOOD

 

It is best to set the block where you want it and measure with a piece of similar hose and mark where you want it cut, pull back off and measure it write it down in a note book untill you have all the lines measured. This is how I did mine. Everyones setup is going to be different based on blower setback, style of hat, tall or short manifold. I put mine on the manifold so I don't have the lines wraping around the blower.
Adam

 

Just for your info, We made them ourselfs. We mounted the block on the back of the hat as well. It is sometimes a pain but all in all it is not that hard to take them off to get the blower off. If you would like I can send you a pic or 2.

The lines are metal

Bob

 

yes would like to see pics if not to much trouble..my first blower engine so everything is new to me
don
hotrodharley@citlink.net

 

ill be working on the car on saturday. ill get the pics then. should have them to you on same day or sunday.

bob

 

Hoses

Always ran them in the back of the injector, Chevy's in Hemi's. Even with my screw blower and dual port nozzles.. How often do we pull the injector off the blower. and intake. Always they are kept bolted together. Nothing against anyone else's ideas. It is just a matter of preference .If it's your first time go out and have fun. do what you think looks good to you. Good Luck Don