Best Camshaft

Discussion in 'PSI Superchargers Tech Questions' started by ZERO260IN1, Oct 11, 2009.

  1. ZERO260IN1

    ZERO260IN1 Member

    Joined:
    Nov 22, 2006
    Messages:
    105
    Likes Received:
    0
    What would be a good choice for a camshaft for a BB wedge 1471 K11 540 motor.

    Would oddy's camshafts be a good choice?

    Right now, Im running a bullet 278 292 at .050 , on a 114..with a .725ish lift cam, making around 30psi of boost. Intake opens 28*BTDC, closes 70*ABDC


    Am I leaving some power on the table, if so what would you build?

    Thanks in advance
     
    #1
    Last edited: Oct 11, 2009
    ZERO260IN1, Oct 11, 2009
  2. hemi altered 378

    hemi altered 378 Blown Altered

    Joined:
    Jul 3, 2004
    Messages:
    864
    Likes Received:
    0
    Chevy? or Chrysler? if you are looking for a good wedge cam for a Chrysler i have one. made for raised cam (48 degree)....was designed by Tom Conway for a blown hemi with wedge heads.
    Darren
     
    #2
    hemi altered 378, Oct 11, 2009
  3. Outlaw68

    Outlaw68 Member

    Joined:
    Oct 14, 2007
    Messages:
    188
    Likes Received:
    1
    Oddy's.. I dont know what your heads are or what application you are running it in, but your camshaft looks way small..
     
    #3
    Outlaw68, Oct 13, 2009

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM