KB Pan

Discussion in 'PSI Superchargers Tech Questions' started by Flyboy68, Sep 29, 2009.

  1. Flyboy68

    Flyboy68 Member

    Joined:
    Mar 26, 2006
    Messages:
    565
    Likes Received:
    0
    We have an Olson dragster pan on our kb hemi. It's had a rough life and the pan rail is a little waivy. Anyone had luck w/ fixing this? It started leaking assembly lube and we don't even have any oil in it! :eek: lol They wouldn't sell me an pan rail, so is a new pan the only option? ...besides used of course.

    Josh
     
    #1
    Flyboy68, Sep 29, 2009
  2. Moparious Crewcheif

    Moparious Crewcheif New Member

    Joined:
    Sep 19, 2009
    Messages:
    32
    Likes Received:
    0
    If your pan rail is thick enough have a machine shop take a cut off of it. Or you could replace it with a new rail. We have done both in the past. Of course you are probably not in Iowa.
     
    #2
    Moparious Crewcheif, Sep 30, 2009
  3. Flyboy68

    Flyboy68 Member

    Joined:
    Mar 26, 2006
    Messages:
    565
    Likes Received:
    0
    Yeah we have a mill and thought about taking some off. Problem is it's not a billet rail and is pretty thin, so we can't do that. Any idea's who would sell a new rail?
     
    #3
    Flyboy68, Oct 1, 2009
  4. secondwindracing

    secondwindracing top alcohol

    Joined:
    Feb 10, 2004
    Messages:
    2,894
    Likes Received:
    7
    what we have done is use the one you have make a pattern then bolt the 2 together and wels it to 1 another .Dave
     
    #4
    secondwindracing, Oct 1, 2009

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM