pump pressure and nozzle pressure placement sensors

Is it best to place the nozzle sensor off the distribution block for the port nozzles? And for the pump pressure where is a good place for that? Is ok to use braided line?

Thanks!

sean

 

Are you using a racepak? Are you using an Analog box for the pressure (mounts to firewall) or are you using pressure transducers?

 

It really depends on what you are trying to do.
For instance...
If you want to catch a dieing fuel pump before major damage occurs, most anywhere between the pump and nozzles will tell you that.
Do you want to know the psi at the nozzles for some of the "programs" out there, than putting it in the distribution blocks is fine.
If you are trying to fine tune your high speed the placement should be close to it.

My $.02

 

racepak

Yes I am using the analog box. I will be using the davenport software as well.
My 1st time with this and want it to be right!!!!

Appreciate it guys!

Sean